SAZ3500 problem need help asap.....

dasinde91
10+ year member

TEAM SUNDOWN
I am currently running 3 nightshade 12's with 2 saz3500d's.. ever since i put in an odysee 2150 battery its been putting my slave amp (2x 3500ds Sundowns) into protect mode, and it will not restart it stays in protection. Any help would be greatful. This is the second amp its done this too, am im completely clueless.

Thanks,

Scott

 
electrical is completely factory other than a optima red top in front, with the odysee in the rear, we have 8 runs of 0 gauge from the back to the front. I'm not sure if everything is paralell, the subs are wired to 1.3 ohms, and hooked up that way. Thank you guys im just seriously confused as this is the second amp thats took a **** from this and im not sure why..

 
electrical is completely factory other than a optima red top in front, with the odysee in the rear, we have 8 runs of 0 gauge from the back to the front. I'm not sure if everything is paralell, the subs are wired to 1.3 ohms, and hooked up that way. Thank you guys im just seriously confused as this is the second amp thats took a **** from this and im not sure why..
so your runnin 7k watts on a stock alt and 1 odysee wow //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif//content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

 
yes I have aim @ sinde91, and yes im running the stock alt on all this, for street c... Anything u guys need to know just ask, i feel like such a **** right now but i really dont know what else could be the problem other then the batttery.

 
so your runnin 7k watts on a stock alt and 1 odysee wow //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif//content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif
Read his post man! it's for street c, which has battery rules. What's your voltage drop to??

 
So just how low does your voltage drop? How hard are you beating on this setup?

You need a much better battery up front. Disconnect everything but power & ground from the amp that's in protect and see if it comes out of protect. If it's blown post up pics of the inside.

 
yes I have aim @ sinde91, and yes im running the stock alt on all this, for street c... Anything u guys need to know just ask, i feel like such a **** right now but i really dont know what else could be the problem other then the batttery.
where does it say anything about street c besides his sig?
^.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

https://www.caraudio.com/threads/all-bnib-focal-fdp-4-600-ds18-exl-p2500-1-sundown-audio-sfb-1000-4d-350x4-4ohms.614462/ :)
18
139
Using a Y RCA to split signal from amp to amp to give both amps the signal they need from the HU and subs in different /separate enclosures tuned...
3
105
Easy fix, If your DSP has a single mono output, split it with a Y and run both to the sub. In my experience, even though the sub amp has two...
1
336

About this thread

dasinde91

10+ year member
TEAM SUNDOWN
Thread starter
dasinde91
Joined
Location
Chicago, IL
Start date
Participants
Who Replied
Replies
83
Views
4,454
Last reply date
Last reply from
audioarsonal
1000006564.jpg

Mr FaceCaser

    Mar 28, 2024
  • 0
  • 0
1000006569.jpg

Mr FaceCaser

    Mar 28, 2024
  • 0
  • 0

Latest topics

Top