a router and a circle jig. flat out the best method if you know how to use them. Remember measure twice and cut once is always key...
kovemaster559 5,000+ posts
Official LOW BALLER!
router and a gheeto jig! made of 1/16 wood!
i went to a framing store and got some scrap 1/8 plexi works wonders for a jig =)
rc10mike 10+ year member
I b sippin on sizzurp
Jasper Jig 200, makes PERFECT circles, its all you need....and a plunge router.
- Thread Starter
- #8
How much are routers, or any other method that I could use to cut the circle?
rc10mike 10+ year member
I b sippin on sizzurp
There are a lot of other methods, like a jig saw, Rotozip for example, but a router w/ jig will give you perfect results.
BTW, the Rotozip tried to kill me many times.
BTW, the Rotozip tried to kill me many times.
- Thread Starter
- #10
whats a rotozip?
rc10mike 10+ year member
I b sippin on sizzurp
Its a cross between a Dremel and a true router, dont buy it. Its not powerful enough to cut mdf, and it tried to kill me.
- Thread Starter
- #12
If I didn't have any of the aforementioned tools what would be the cheapest to buy?
I us a roto zip.. But It won't help much with anything over 12" ... well the jig that I have for it anyway..
Alpineforever 10+ year member
CarAudio.com Elite
I use a compass and a jigsaw.
But that's because I'm real good at keeping my hand steady and cutting perfect(ish) circles, if you can get a jig with a clutch it helps a lot compared to a one speed jig.
But that's because I'm real good at keeping my hand steady and cutting perfect(ish) circles, if you can get a jig with a clutch it helps a lot compared to a one speed jig.
ruler and a jigsaw
Activity
No one is currently typing a reply...
Similar threads
Defiantly. LOL 😂 It has never happened to me👀:poop:
- Started by Evan Kays
- General Car Audio
Using a Y RCA to split signal from amp to amp to give both amps the signal they need from the HU and subs in different /separate enclosures tuned...
- Started by Aaron Johnson
- General Car Audio
https://www.parts-express.com/GRS-10SW-4HE-10-Paper-Cone-Rubber-Surround-High-Excursion-Subwoofer-4-Ohm-292-818?quantity=1
One of these in a...
- Started by Evan Kays
- General Car Audio
Hahaha his brother got some from a friend. American bass amp and some alpine s 12in subs. From a buddy of his now Eastons chomping at the bit...
- Started by Booger68
- General Car Audio
I ran 1200 watts through 12 gauge. Didn't notice any melting on the wire's insulation.
- Started by Aryan
- Wiring, Electrical & Installation
About this thread
Latest topics
-
Help With Kenwood DDX9907XR / DMX907S - Kenwood Technical Support Can't Help
- Started by fadetoblack73
- Replies: 5
-
-
-
-
Amp Shorting out Infotainment Screen?- Started by Chris Morton
- Replies: 6