Jump to content


Sign in to follow this  
the727kid

Box Build for matador_de_sa

Recommended Posts

Build is for 2 10" Kicker CVXs. Box is 3 cubes with 42.5" of port tuned to 34hz. Box will be carpeted and painted port.

 

Once again... 16x48 sheets FTMFW

 

IMG_1307.jpg

 

All cut

 

IMG_1308.jpg

 

Sides Up

 

IMG_1309.jpg

 

Best Technique IMO to carpet

 

IMG_1310.jpg

 

IMG_1311.jpg

 

Front On

 

IMG_1312.jpg

 

I left off here, will finish it tommorow hopefully.


Alarm: Viper 5902

HU: Stock

Front Stage:

Tweeters: Image Dynamics CD1-Pro Mini Horns

Mids: Sundown Neo Pro 8"

Subs: (2) 15" Dayton HF ran IB

Amps: (2) Kicker IX 500.4 (1) Kicker IX 1000.1

Processor: JBL MS-8

Share this post


Link to post
Share on other sites

Looks good.


2004 Lexus GX470

21% tint on front windows

2 12" JBL in a sealed box

PA3000ab amp

ML system

Factory Nav and RSE

[sIGPIC][/sIGPIC]

 

scooters are like fat chicks. Fun to ride until your friends catch you on one :)

Share this post


Link to post
Share on other sites

looking good very clean


CA REFS: themommyvan DECADO2, PATH2SPL, NEVERENUFFBASS, xhilr8n, jdc753, Racerx250, Zxcvtypo, hc3_cuz, wong05tsx, JK_AUDIO, Supergumby5000, Ken448,mojobass, craigzter, GMOORE, MitchZ, dumple, djman37,Thewes,Team MAF, Dragnix, and others

 

ROE REFS: Stoker_41, xhilr8n, blackdragonx118

 

Feed back Thread as a buyer trader:http://www.caraudio.com/forum/showthread.php?t=267238&highlight=KINGDELL91

Feed back Thread Seller:http://www.caraudio.com/forum/showthread.php?p=3761820#post3761820

BUILD LOG http://www.caraudio.com/forum/showthread.php?t=303112

 

this thread should get a lot of attention over the title.

 

compared to the jackhammer that thing should be called a tack hammer

Share this post


Link to post
Share on other sites

Port:

 

IMG_1314.jpg

IMG_1315.jpg

 

Subs hole cutout and port flushed out... and taped ready for paint:

IMG_1316.jpg

 

Back piece taped and painted...

IMG_1317.jpg


Alarm: Viper 5902

HU: Stock

Front Stage:

Tweeters: Image Dynamics CD1-Pro Mini Horns

Mids: Sundown Neo Pro 8"

Subs: (2) 15" Dayton HF ran IB

Amps: (2) Kicker IX 500.4 (1) Kicker IX 1000.1

Processor: JBL MS-8

Share this post


Link to post
Share on other sites

Carpeting

IMG_1318.jpg

IMG_1319.jpg

IMG_1320.jpg

 

All Done

IMG_1321.jpg


Alarm: Viper 5902

HU: Stock

Front Stage:

Tweeters: Image Dynamics CD1-Pro Mini Horns

Mids: Sundown Neo Pro 8"

Subs: (2) 15" Dayton HF ran IB

Amps: (2) Kicker IX 500.4 (1) Kicker IX 1000.1

Processor: JBL MS-8

Share this post


Link to post
Share on other sites

Nice!


Team TREO

Team Midwest

Team Gorilla

USACI- trunk 0-1000 156.4 and climbing

153 sealed on the dash

yes its a trunk car and yes its only (2) 12s...

 

refs=sold to......R/T Pimp, mustangowner, zyklonb, Miles0803

Bought from…..2002XLT, R/T Pimp, 92c1v1c, Miles0803, camshoc, dbeez, goindef154

Share this post


Link to post
Share on other sites

looks good....i see a little fisher carpeting type action going on there. Just need to perfect that bottom seam


if u need a box...I'l taked 3 years of shop class so i know what im doing.

 

 

after i explained to him there's more to a proper box than boards and glue and he should practice before trying to sell boxes to others

 

yes personaly if it was some one elce that just starting making boxes but i'v taken shop for 3 years now...Making a lil box is nothing i don't need to pratice on a box to get it right i learned alot of stuff from 1 box and i can fix that in my next box

 

after i told him that customers would care about the looks of the box

 

if u want some thing that looks pretty why don't u find a black guy with a big d*ck.

Share this post


Link to post
Share on other sites
looks good....i see a little fisher carpeting type action going on there. Just need to perfect that bottom seam

 

Yea I'm still trying to figure out how to perfect that. I know the technique, it just never comes out 100%.


Alarm: Viper 5902

HU: Stock

Front Stage:

Tweeters: Image Dynamics CD1-Pro Mini Horns

Mids: Sundown Neo Pro 8"

Subs: (2) 15" Dayton HF ran IB

Amps: (2) Kicker IX 500.4 (1) Kicker IX 1000.1

Processor: JBL MS-8

Share this post


Link to post
Share on other sites

i glue the seam down to the bottom when i first start the carpeting process....then when i get the second seam all the way around the box, i overlap the 2 seams. Using a straight edge, i cut through both layers, then peel up the thin strip that was was glued down, spray on some more glue and the seams line up perfect from there. I don't even touch the sides until that bottom seam is 100% perfect


if u need a box...I'l taked 3 years of shop class so i know what im doing.

 

 

after i explained to him there's more to a proper box than boards and glue and he should practice before trying to sell boxes to others

 

yes personaly if it was some one elce that just starting making boxes but i'v taken shop for 3 years now...Making a lil box is nothing i don't need to pratice on a box to get it right i learned alot of stuff from 1 box and i can fix that in my next box

 

after i told him that customers would care about the looks of the box

 

if u want some thing that looks pretty why don't u find a black guy with a big d*ck.

Share this post


Link to post
Share on other sites

what do you use to cut the edges on the wood for the carpet to go in?

 

i imagine it was either a rabbitting bit or a straight cut bit in a router


if u need a box...I'l taked 3 years of shop class so i know what im doing.

 

 

after i explained to him there's more to a proper box than boards and glue and he should practice before trying to sell boxes to others

 

yes personaly if it was some one elce that just starting making boxes but i'v taken shop for 3 years now...Making a lil box is nothing i don't need to pratice on a box to get it right i learned alot of stuff from 1 box and i can fix that in my next box

 

after i told him that customers would care about the looks of the box

 

if u want some thing that looks pretty why don't u find a black guy with a big d*ck.

Share this post


Link to post
Share on other sites
i imagine it was either a rabbitting bit or a straight cut bit in a router

 

Good guess....

 

But it really only works well with a router table, which I don't have.... So I lower the blade on the table saw to about 1/8th" and then I set the guide to an 1/8" and use that, works much better than the router.


Alarm: Viper 5902

HU: Stock

Front Stage:

Tweeters: Image Dynamics CD1-Pro Mini Horns

Mids: Sundown Neo Pro 8"

Subs: (2) 15" Dayton HF ran IB

Amps: (2) Kicker IX 500.4 (1) Kicker IX 1000.1

Processor: JBL MS-8

Share this post


Link to post
Share on other sites

Looking good, very nice build and good job on the carpet.

 

Where did you buy the carpet from? and what did you use to glue it down?


2005 F350 crew cab diesel 4x4

-Work in Progress-

HU: Alpine 9887 linked to 10.4" TS TruckPC

Front Stage: Polk SR6500 Active

Front Amp: Sundown Sax100.4

Sub: Stereo Integrity Magnum V4 in the center console

Sub amp: Sundown Saz-1500D

 

Refs: low_end, Relax, SSon22s, Johnson, tyroneshoes, twisztdpunisher, flakko, djhn9, KINGDELL91, amoffitt, Justin89T, 01 S 10, Mazzasec

Share this post


Link to post
Share on other sites

Yep, I see BJ is rubbing off on other people, which is awesome. We need more box builders that know what they are doing................I am not a box builder, lol!

 

Good job!


Refs~Max Power(ST), bnevets27(ST), 99oldsintrigue(ST), matrxx dude(BF), Ficaraudio(BF), Zachzchw(BF), tigerf117(ST), 5.7TBI(BF), DBfan187(ST), Joesph M(ST), 97gp(ST), Cornbreadxd(ST), SlappinX(ST), nycspudz03(ST), bl0ckd(BF), Sctattooer(ST), hitman34608(ST), Wackdogg(ST), ggk(ST), 03F150MrSBF(STx2), Dye4metal(ST), Mikey7182(BF), Wu501(BF), Twisted_0912(BF), Crunklech(BF), psychoacoustics(BF), Tyler Chavez(ST), GTO Dave(ST), Thisistiny(ST), DarkScorpin(BF), davidtemple(BF), BassaddictJ(BF), Geoff_off_me(BF), Dragnix(BF)

 

BF=Bought from

ST=Sold too

Share this post


Link to post
Share on other sites

Create a free account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's free & easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×