03 Eclipse Atomic Build

hazardous0388
10+ year member

CarAudio.com Veteran
System...

H/U: Pioneer 6900, using USB cord

Components: Atomic Quantum 6.5

Component Amp: SS PCA 2.260

Rear Fill: Atomic Manhattan 6.5 coaxials.

Sub amplifier: Atomic 5000.1d

Subwoofer(s) : 2 Atomic APX 10s, dual 1.5vc. Will be doing tests on single 10 and two 10s with termlab.

Electrical: Exide Orbital Dry cell under hood for daily with two Stinger sp 1700s in the rear.

Power cable: 6 runs of 1/0 from front to back, 3+ and 3 - . All 1/0 is Kicker Hyperflex.

Sound Deadening: 110 sq ft of Dynamat Xtreme

my next day off to finish the install will be monday. so far i have my component amp mounted with all wires ran up front to the crossovers, but no components in the doors yet. i have the rear speakers install, and the 6 runs of 1/0 ran from front to back. I ran new wires from the headunit for the rear speakers, and uninstalled the factory infinity amplifier. i have been keeping my wires clean and wraping in electrical tape as you can see in the pics. also, pics for the trunk have not been taking yet. Will take those monday when i finish...

100_0431.jpg


100_0432.jpg


100_0433.jpg


100_0434.jpg


100_0435.jpg


100_0436.jpg


 
was finally able to get more time to work on the car. doors are deadened and components are in finally... since the tweeters are big, they had to be installed directly into the existing tweeter pods. the existing tweeter cover was removed and tweeters were placed in a flush fit. this was done by a previous member of Team Soundstream, Maxxsonics, and Tsunami, named Joe who is the install supervisor at the CC I install at. he did a very good job and they came out perfect. will get pics of them tomorrow.

RightdoorDynamat.jpg


LeftdoorDynamat.jpg


 
what happened to the pioneer 4000?
i took it back because I didnt want a plain dvd player headunit. plus im going to be buying a pioneer 9800 through my accomidations at CC. very nice price

//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

  • Locked
COMPLETED WTB Eclipse SC8365
I checked at Diyma and I signed up for an account but I cant post in the classifieds. Thanks for the tip, I'll keep a check there.
7
1K
I have a couple 3000s and 5000s and cant remember the other two right off hand, but these will not work with your unit that I can think of by...
4
783
In order to answer your question, I would need to know what model (e.g. SW4200, SW7524DVC). Also, are you looking to make a ported box or sealed?
3
2K
I’m running two sw9122 to my da7232
8
3K

About this thread

hazardous0388

10+ year member
CarAudio.com Veteran
Thread starter
hazardous0388
Joined
Location
Springfield, MO
Start date
Participants
Who Replied
Replies
30
Views
4,610
Last reply date
Last reply from
RAM_Designs
IMG_0632.jpg

just call me KeV

    Apr 19, 2024
  • 0
  • 0
IMG_0629.jpg

just call me KeV

    Apr 19, 2024
  • 0
  • 0

Latest topics

Top