mtx txc6.1

  • 2
    Participant count
  • Participant list
The RMS on those is 150watts and the max is 300. In the crossover there is a light bulb that will start glowing when your starting to drive the tweeters too much. So dont keep that light going too long, I would say its too much if that light is on the whole song. They sound great if they are set up good, but they dont play lows very well, definitly use them with a subwoofer. Dont try and get them to put out anything lower than 100 hertz. they will do it but they wont sound as good.

I have 1 pair of these as well as a pair of the 6.0 and the 5.1, they all sound amazing. I use them in my show car and I will use them again in my next show car.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Thanks buddy! Given me a lot to think about in terms of what to do; I've been watching YouTube videos on this stuff all day as well so I really...
4
657
You can wire those subs up @8 ohms if they are both SVC4 ohm subs,and that amp will run fine after being tuned properly...
4
1K
The 240 should be 2x40/ 2ch. rated at 11.9v. Should generate close to 50+ @14v rms. Only Rated @4 ohms bridged Mono.. Should be around 125 rms...
5
2K
In 1990: The MTX MTA 225 had a MSRP of 549.95 25x2 0.02% THD S/N 102 12x 8 1/2x 2 3/8 The MTX MTA 250 had a MSRP of 649.95 50x2 0.02% THD S/N...
5
2K

About this thread

350_regal

10+ year member
Registered User
Thread starter
350_regal
Joined
Location
wi
Start date
Participants
Who Replied
Replies
2
Views
1,513
Last reply date
Last reply from
kitstreetsounds
1713846388212.png

Random4thGuy

    Apr 23, 2024
  • 0
  • 0
1713846076243.png

Random4thGuy

    Apr 23, 2024
  • 0
  • 0

Latest topics

Top