look what fedex delivered

reason i was thinking onewas because heres power output (cant og down to 1ohm i tried it just pops fuses on the amp itself)

POWER RATINGS

- Maximum Output Power: 1000 Watts

- Power Output at 2 Ohms, at 14.4V (100Hz, 0.5% THD): 400 Watts x 1

- Power Output at 4 Ohms, at 14.4V (20Hz - 200Hz, 0.5% THD): 200 Watts x 1

i heard tha under powering a subis bad is this true? what i if i put 200 to each? be bad for them in any way less then them not being able to reach full xmax? any downsides on the coils or driver itself?

o really? thanks for that information for some reason i thought it was bad. o well im gonna run them at 200 watts a peice for a bit untill i gte my 1606d and build an amp rack //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif ill just run them like im running my HE2's at 4 ohm with 200 to each sub.

it will be a big difference listening to themat 200 watts then jumping to 800 a peice //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif