Worth the upgrade from single JL 10w3v3 to dual SD X8v2?

So going by everyones suggestions it would be better to get a pair of SA8v3 instead of the Xs?

I already got the NVX1200.1 amp, but I could alwas upgrade in the future if my truck could handle the amp upgrade without doing much upgrades on the electrical system besides the big 3

Thx again for all the suggestions

 
I decided to do a quick search for 8" subs with low Fs and found the Dayton Ultimax to have one of the lowest Fs out of most 8" subs with 31.6 Hz, the Daytons handle 300 rms and require a .75 cf net enclosure tuned to 30 hz

What do you guys think of them? with 3 of them in dual 2ohm voice coils I would be getting a 1.3 ohm load and probably be giving each sub about 300 rms

 
I decided to do a quick search for 8" subs with low Fs and found the Dayton Ultimax to have one of the lowest Fs out of most 8" subs with 31.6 Hz, the Daytons handle 300 rms and require a .75 cf net enclosure tuned to 30 hz
What do you guys think of them? with 3 of them in dual 2ohm voice coils I would be getting a 1.3 ohm load and probably be giving each sub about 300 rms
most peeps here like daytons they get recommended all the time.. idk about over the sundowns though..

 
The daytons will sound really good.
The sa8s will also sound good, and have excellent output
The amp I will be using was dynoed at 1,037 watts rms at 2 ohms and 1,383 watts rms at 1 ohm

With impedance rise I could do something like

3 Dayton ultimax getting around 300 rms each for a total of around 900 watts rms at 1.3 ohms

or

2 SA8v2 with around 500 rms each for a total of 1,000 watts at 1 ohm

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

If you like the sub you have, then continue to run it. I would look at what improvements that could be made to do some deadening and maybe port...
8
1K
Deff not going to hear much of a difference of the 4 ch amplifiers unless you are going to 100 rms per ch. With 10 watts, its just not worth the...
5
365
Anything worth getting is always worth it more at a steep discount. Not familiar with that unit, but the brand is great.
1
456
In this Bidenconomy it is worth around $13,634. And a loaf of bread.
3
909
Absolutely not!!! Acetone eats everything it touches other than metal that is.. there is a reason it comes in metal containers with metal caps...
11
887

About this thread

kmu

10+ year member
CarAudio.com Elite
Thread starter
kmu
Joined
Location
Tucson, Az...
Start date
Participants
Who Replied
Replies
20
Views
1,451
Last reply date
Last reply from
kr15
DD451980-D607-41AB-B69C-6745AAE4B848.jpeg

SlugButter

    Mar 28, 2024
  • 0
  • 0
F98C6D78-7734-4659-9FCA-34969BDDC56A.jpeg

SlugButter

    Mar 28, 2024
  • 0
  • 0

Latest topics

Top