Who owns an Audioque HDC3 10"?

[SPLluminator 10+ year member]

I did own them. I had 2 and my fav box by far was 2.2 cubes tuned to 40hz for both of them(so 1.1 cubes each). Also, they seem to like a lot of port space and a small box so take that into consideration. If your trying to get low you might not want to go that route tho.

 

[justin smith 10+ year member]

i like my hdc3 15 alot... it gets nasty low in the box i have it in, and takes the power with ease when i play near tuning

 

[Slo_Ride 5,000+ posts]

i like my hdc3 15 alot... it gets nasty low in the box i have it in, and takes the power with ease when i play near tuning

i bet tuned to 26hz!

 

[mlstrass 5,000+ posts]

1.5@35Hz with 22^&2 of port area if you do a slot. Should be nice with the power you have and assuming you will mostly play rap...

 

[blkbeater 10+ year member]

mines tuned to 32hz and gets low no problem

 

[Slo_Ride 5,000+ posts]

Alrighty just ordered my HDC310. Probably gonna start on the box tomorrow. Will try 1.5 cubes at 35hz with two 3" ports. After that I'll build a couple of different boxes and see what I like best. Hopefully I'll be satisfied and wont end up selling it like I always do.

 

[Slo_Ride 5,000+ posts]

another question... when using round ports, both ports should be on the same plane right? just thinking if i should put both ports to the passenger side, or one port to the pass. side and one port to the driver side. sub will be facing forward angled slightly up at 28 degrees.

 

[groundpound4200 5,000+ posts]

I had 15" HDC3s with an FS in the 40s and they played well below that. Theres more to it than just the resonant frequency

 

[trappin859 10+ year member]

I've got mine in a 4.5cu^3 tuned at 38hz and it SLAMS on Juice Box, Waddle and Hood *****. Not sure what the freq. on those songs are, but I know they are quite a bit lower than most rap songs.

Tuning the enclosure in the 36-40hz range should have zero effect on the low notes provided it's got enough airspace.

 

[Slo_Ride 5,000+ posts]

another question... when using round ports, both ports should be on the same plane right? just thinking if i should put both ports to the passenger side, or one port to the pass. side and one port to the driver side. sub will be facing forward angled slightly up at 28 degrees.

to add to this... port options are - one 4" to pass. side, two 3" ports to pass. side, or two 3" ports up.

 

[justin smith 10+ year member]

i bet tuned to 26hz!

//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif i like to move air, my box has interchangable ports and i have a 40hz port also

 

[Slo_Ride 5,000+ posts]

crap I forgot to mention what vehicle this is going in - a toyota mr2, two seater, mid engine. box will be behind seats like in a standard cab truck, kinda.

 

[tehbert0 10+ year member]

built a box for two 10's in my buddy's stealth. tuned to 31 i think hit the lows real nice. and i've heard 15s get deathly low

 

[tehbert0 10+ year member]

vid from first day of testing..

 

[BassElementz 10+ year member]

mugatu0 has an HDC-A 10 and that thing gets low. hes only ported at 36-37 i think. im practically with him everyday. i love riding in his car. ppl cant believe hes only running one 10 when they hear it.