This is one of 4 subs I used to run in the early 2000's. This one ended up dead after being ran on a 1500 bd by itself lol. Man it rocked for a while though. The failure was a burnt lead. This is my first ever sub rebuild after being coached by DJ on here. I am very mechanically inclined as I am a pipe welder and build my own rock crawlers. But this stuff is very intricate and has been a challenging so far but completely doable with patience and measuring 3 times cut once type of things lol. Here are my pics so far. Waiting on my spring clamps from Amazon so I can't finish it out. I have the drop in built out and solid, shims were always used even on just the mockup, I didn't want anything binding. I cut the cone just a hair big so it slipped over easy so not to push the VC around. Anyways here yah go.
Attachments
-
IMG_20220524_185018844.jpg1 MB · Views: 25
-
IMG_20220524_185002784.jpg1,001.3 KB · Views: 27
-
IMG_20220524_185039957.jpg366.7 KB · Views: 26
-
IMG_20220524_185032114.jpg483.4 KB · Views: 24
-
IMG_20220524_191540809.jpg771.5 KB · Views: 29
-
IMG_20220524_191603542.jpg516.7 KB · Views: 26
-
IMG_20220524_191557017.jpg448.7 KB · Views: 28
-
IMG_20220524_191608269.jpg525.5 KB · Views: 26
-
IMG_20220524_192451995.jpg422.4 KB · Views: 31
-
IMG_20220524_192454899.jpg448.6 KB · Views: 26