RFR 3110 Ported Enclosure Design

[Grimmjoww]

Been working in subox. You guys that are into box building care to check my specs.
Vehicle - Jeep YJ Hard Top
Sub - RFR 3110 dual 2ohm
Amp - taramps Smart 3 or bass 3k
I have 26x16x16 to play with in box size. I have to leave room for my winch straps, tools and extra battery. Here is the link https://subbox.pro/en/b/r7KupJclY

Click to read more...

 

[Grimmjoww]

I am going to add an additional 3/4" piece to the baffle and have the measurements figured out to do so. Was kind of trying to get the dimensions big enough to run a 12 that likes the same cubes in the future if need be. I took the size and tuning freq from RF spec sheet. I do not know how accurate that will still be as I have rebuilt the sub. The new voice coil had the same measurements but I believe power handling has increased, the new dual spider is progressive and definitely stiffer than factory. The cone seems to be a touch lighter but very similar.

 

[Grimmjoww]

How does this look?

 

[SlugButter]

Measurements look right. No bracing in the box?

 

[Grimmjoww]

Measurements look right. No bracing in the box?

I thought about running two 1 inch dowels, top to bottom and side to port side. I am going to run 2 baffles, so will be 1 1/4" thick front.