re8's?????

Lowridin_Chevy
10+ year member

ridin on 16's......bling!
how do u think this setup would sound

alpine mrp-m350 that put out 350 watts rms @ 2 ohms (a little underrated)

4 re8's

2 cu.ft. ported box tuned to 33 hz

all goin in a reg cab.....give me some opinions on this setup....should i do this setup?????? i already have the amp so jus mainly on the subs

 
u need more power //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

try to get atleast like 500watts to them.. maybe a JBL600.1

 
because if u were lucky each would be gettin 100watts from that amp.. and the RMS is 150 and they have been known to take in the 200s

also a SSF isnt a must...

 
because if u were lucky each would be gettin 100watts from that amp.. and the RMS is 150 and they have been known to take in the 200salso a SSF isnt a must...
well to start off with with ported it is much more efficient so i think 100 will doit well..

jus look at bigbassmans setup where he has 18 of em hoooked up to a 1500 watt amp or some thing like that..thats LESS than 100 to each

also if ur gonna go ported i do believe that u do need a ssf unless u like to replce blown subs and me i dont...

oh yea i heard that the re8's aref fixen to go on sale for 33 bux any1 know when???????

 
well to start off with with ported it is much more efficient so i think 100 will doit well..jus look at bigbassmans setup where he has 18 of em hoooked up to a 1500 watt amp or some thing like that..thats LESS than 100 to each

also if ur gonna go ported i do believe that u do need a ssf unless u like to replce blown subs and me i dont...

oh yea i heard that the re8's aref fixen to go on sale for 33 bux any1 know when???????
Well if you know everything, why even post?

 
but 80 watts per sub equalled 1440 total watts. That's plenty of power combined with the massive amount of surface area.

350 watts with somewhat low surface area will not be very loud.

I recently hooked up 4 re8's to my MTX 81000d and have each 300. They began to bottom out so i turned it down some, but they can easily take 200 a peice.

You just have to be careful when porting without a ssf, tune it rather low and try to avoid frequencies below your tuning freq.

 
I have 200 watts to each with no problems and no SSF with no problems in a ported box. If your blowing subs without a SSF in a ported box than the problem is with you not the box, sub, amp or lack of a SSF. Turn the gain or volume down. //content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif

 
how many amps do u think that 1200 watt amp from elemntal designs would pull (i think its called the nine.2 or nine.1 whichever is the 1200 watt one.) with that deal with the amp and subs it would run the amp at 2 ohms rite?????how many amps do u think it would pull at 2 ohms???

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Lowridin_Chevy

10+ year member
ridin on 16's......bling!
Thread starter
Lowridin_Chevy
Joined
Location
Alabama
Start date
Participants
Who Replied
Replies
16
Views
700
Last reply date
Last reply from
ghs_wrestler189
20210725_221224.jpg

BP1Fanatic

    Apr 25, 2025
  • 0
  • 0
20210725_221138.jpg

BP1Fanatic

    Apr 25, 2025
  • 0
  • 0

New threads

Top