need some assistance please

[ShRapNeR 10+ year member]

ok here's the scoop...

I have a 15" XXX and a BX1500D amp

hooked everything up, worked fine for 10 minutes then the amp shutoff and i can't get it back on now..

Ive check my ground. nice and clean no paint. all my fuses are find... and my rca's are right and the remove is good....

what could be the problem for this thing not coming on anymore?

i had the speaker wired at 1 ohm..

please help if you can.

Click to read more...

 

[Matador 10+ year member]

is the amp on protection mode or it doesn't power on at all?

if it's in protectino mode, unhook the spks and see if it turns on.

triple check you got a good ground and that all connections are good.

 

[ShRapNeR 10+ year member]

is the amp on protection mode or it doesn't power on at all?
if it's in protectino mode, unhook the spks and see if it turns on.

triple check you got a good ground and that all connections are good.

it gets no power at all.

 

[ShRapNeR 10+ year member]

ok.. so i take the amp out... then hook it back up and now it works..

very strange.now it only shuts down part of the time. then comes back on.. and the protection light will blink

how to fix?

 

[slick rick 10+ year member]

big 3 perhaps? i think hitman will help you out on the org //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif