Is a dual use for my rear channels possible?

  • 1
    Participant count
  • Participants list

JakeJB

CarAudio.com Newbie
1
0
Utah
OK, so here is a little background to help explain my question. Hello everyone btw...

My truck is an F150. I am installing an Infinity Reference 6x8 in each door, replacing the factory front tweeters with Infinity Reference 3/4" tweeters, and installing Infinity 3/4" tweeters in the rear doors. My subwoofer isn't an issue. I now have 8 speakers to power.
What I am planning is to power the 6x8s with an additional amplifier, and to power the tweeters with the factory amplifier door channels. I have read that the factory amp puts out about 15w per channel, which seems sufficient for the tweeters. The tweeters all came with inline filters.

Here's the rub. Whether I use a line out converter or the high level input, I will need to tap into my rear door speaker lines. Can the factory rear channels be used to power the rear tweeters and send signal to the amplifier at the same time?

Thanks so much!
 
Activity
No one is currently typing a reply...

Similar threads

Whoa, that will be one skinny port. The width of the back wall ports will be 1.08" wide (27.5mm), but the front port will be shared by 2 subs so...
5
644
Assuming the box is made of .75" MDF the 12"x20"x15" box is 1.5 Cu Feet. The 33"x19"x15" is 4.3 cubic feet, something is not right here. JL has...
3
651
Recoil 2500.1 $179 2500 x 1 @ 1 ohm. Make sure subs are the dual 4 ohm version. If you don't want that much power, get the Recoil red1200.1 for 1...
4
759
You should run all exact matching subwoofers in one singular enclosure and 1 amp or matching amps for the best listening experience for the space...
11
1K

About this thread

JakeJB

CarAudio.com Newbie
Thread starter
JakeJB
Joined
Location
Utah
Start date
Participants
Who Replied
Replies
0
Views
521
Last reply date
Last reply from
JakeJB
DD451980-D607-41AB-B69C-6745AAE4B848.jpeg

SlugButter

    Mar 28, 2024
  • 0
  • 0
F98C6D78-7734-4659-9FCA-34969BDDC56A.jpeg

SlugButter

    Mar 28, 2024
  • 0
  • 0

Latest topics

Top