Home for the 15MT

[Cahm Rohn 10+ year member]

I have a 15 MT being ran off a VFL 150.1. My question is would 9cuft @32 be all right? I plan on using (2) 6 in aero firing into the back seat with sub up in a 72 skylark.

Click to read more...

 

[smd4life 5,000+ posts]

ports back you may need more port area

 

[Cahm Rohn 10+ year member]

Would 4, 6in aeros be enough

 

[smd4life 5,000+ posts]

im not sure, pm PV audio, he would know for sure

 

[ngsm13 5,000+ posts]

I'm telling you, for daily... it LOVES

4.5cubes NET tuned to 33hz w/ 90 square inches of port...

nG

 

[Cahm Rohn 10+ year member]

Could wang and still have room for the kids things cool. As long as it hits the lows and disrupt breathing a bit.

 

[Digital B 10+ year member]

Hmm.. Seen that sub somewhere.

When you get everything installed, let me know. Wouldn't mind hearing it. I only had it on 1kw in the short time I had it in my car..

 

[Pop da Hatch 10+ year member]

I'm telling you, for daily... it LOVES
4.5cubes NET tuned to 33hz w/ 90 square inches of port...

nG

ive calculated that a 32hz tuning would show a 1 db gain //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[Cahm Rohn 10+ year member]

Trunk=jello

 

[PV Audio 5,000+ posts]

ive calculated that a 32hz tuning would show a 1 db gain //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

I'd certainly like to see these calculations.

 

[bamaboy 5,000+ posts]

9 cubes is more than an 18 needs //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

do nJizm's idea, mine in 4cubes each are crazy

 

[mobeious 10+ year member]

i know that VFL150.1 put out power but i dont think that is going to do u any good at 1ohm i ran 1 of my MT18's on my VFL400.1 @ 2ohm and the MT laughed at it... it really sounded like shit you could tell it was underpowered i then droped the load to .5 and my MT smiled and wanged away..... my vote goes for more power

 

[Pop da Hatch 10+ year member]

I'd certainly like to see these calculations.

you would say that - search sarcasim button on google - I'd certainly like to see those results....

 

[Cahm Rohn 10+ year member]

Well I did want to run the 150.1 lower but I searched and found out that might not be a good idea, so I got dual 2, an ran it at 1 ohm. I was going to get a 2500d but couldn't find one so I got the 150.1.

 

[PV Audio 5,000+ posts]

you would say that - search sarcasim button on google - I'd certainly like to see those results....

Well you see, we're communicating on this odd thing called the internet. You cannot tell sarcasm through text.