FEATURED Downfiring box for my truck

[ᛒᛚᚨᛞᛖ]

I used 50$ roll on bed liner from Harbor Freight on my 6th order. It actually dried nice and even to my surprise. That 1 gallon of bed liner painted 4 enclosures. One of the only cheap things I’ve bought that actually worked well from harbor freight. It’s also durable and resists scratching quite well.
View attachment 46014

Nice! I definitely would have considered that route if I new it would come out that smooth.

 

[ᛒᛚᚨᛞᛖ]

Did you you do the whole thing with just glue?
If so what kind?
Always wanted to try but never had the balls to

Yep, just regular tightbond glue. I hardly ever use screws.

I've seen people say online that glue is all you need but I always had a hard time believing it and figure why not use screws as well for the extra few minutes it takes.

My bro who knows nothing
about speaker boxes but is a great wood worker backed those claims up. So finally I did a test on some scrap pieces. I can confirm that the wood will come apart before the glue does as long as you have nice straight flush cuts. I'm still using screws on my current build due to only owning 2 large clamps. I'm basically only using screws to draw the wood together while the glue dries.

 

[Ridinhi 5,000+ posts]

I've seen people say online that glue is all you need but I always had a hard time believing it and figure why not use screws as well for the extra few minutes it takes.

My bro who knows nothing
about speaker boxes but is a great wood worker backed those claims up. So finally I did a test on some scrap pieces. I can confirm that the wood will come apart before the glue does as long as you have nice straight flush cuts. I'm still using screws on my current build due to only owning 2 large clamps. I'm basically only using screws to draw the wood together while the glue dries.

My cutting skills aren’t 100 but I do make sure to be generous with the glue and use wood filler for any small gap. I will use a screw(s) if my cut is a total f@ckup to draw the pieces together.

 

[Ridinhi 5,000+ posts]

I'm basically only using screws to draw the wood together while the glue dries.

Exactly This!!!

 

[SlugButter]

I use screws on the inside, mostly becasue I don’t like waiting to take off the clamps. I add my bracing as I go and just screw it inside with 1 1/4 inch screws.

 

[Jimi77 5,000+ posts]

I have a question
I don’t see any nail or screw marks
Did you you do the whole thing with just glue?
If so what kind?
Always wanted to try but never had the balls to

Glue is stronger than screws, stronger than wood itself. The wood grain will give before a good glue bond.

 

[Jimi77 5,000+ posts]

I used 50$ roll on bed liner from Harbor Freight on my 6th order. It actually dried nice and even to my surprise. That 1 gallon of bed liner painted 4 enclosures. One of the only cheap things I’ve bought that actually worked well from harbor freight. It’s also durable and resists scratching quite well.
View attachment 46014

I may have to try that. I was looking at the PE stuff, but it's $40/quart. Any special prep work, priming?

 

[SlugButter]

I may have to try that. I was looking at the PE stuff, but it's $40/quart. Any special prep work, priming?

I always prime. I’m not sure if its necessary or not with the bed liner. It helps save doing 4 coats with expensive paints though.

 

[Jimi77 5,000+ posts]

I always prime. I’m not sure if its necessary or not with the bed liner. It helps save doing 4 coats with expensive paints though.

Acrylic primer???

 

[SlugButter]

Acrylic primer???

not for bed liner. I just use thinned down Killz and roll it on to seal the wood. If I’m doing a gloss paint I switch over to a better primer.

 

[Ridinhi 5,000+ posts]

What’s up guys. My wife passed away on Jan 7th and I can’t find words to explain the hurt. Just taking life one day at a time. I’m gonna start back with this build to keep my mind occupied.

 

[Daryl rsv4]

Damn man, just messaged you about your subs and then saw this. So sorry to hear.

 

[deez283 10+ year member]

Sorry for your loss, Hope you are doing ok.

 

[Bass Addict 10+ year member]

Sorry to hear that man.condolences

 

[Bobbytwonames 5,000+ posts]

What’s up guys. My wife passed away on Jan 7th and I can’t find words to explain the hurt. Just taking life one day at a time. I’m gonna start back with this build to keep my mind occupied.

Bro, that is horrible news and I will just leave it at that. You can DM if you need to talk. Take care of yourself and stay strong. You know that is what she would want you to do. Make her proud of you by staying strong and enjoying your life in her honor. ❤