Big Boom, Small Room

[King$Kong]

Ok, now heres a challenge, well definently to me, but any way I got an s-10 reg. cab 2000 pickup and I want to put this sub in it: http://respl.com/12.html it says to put it in a ported box that's designed for SPL and is 3.5 cuft, with a 43 Hz tuning and I don't even no where to start:banghead: . O and heres a pic of the space I got(if it helps):

http://www.mtxaudio.com/caraudio/images/tFormS1010Install.jpg

So now I leave it up to you guys to help me out.Holla Back

Peace out

Click to read more...

 

[King$Kong]

O' yea and I want be able to put it in the bed because theres dros in it.

 

[ramos 5,000+ posts]

Are you going to compete , or is this for daily bumping ?

You might run into some issue's with mounting depth. THe xxx's are quite deep. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[King$Kong]

Daily Bumping, if I cant fit the xxx then what can I fit that will have a really good boom to it and quality.

 

[RangerMan Premium Member]

Originally posted by King$Kong Daily Bumping, if I cant fit the xxx then what can I fit that will have a really good boom to it and quality.

The XXX is over 7 inches in depth. That thing is massive. You can't put it in a reg cab without taking a seat out. The thing I would recomend is a Regular Cab Cut-Through.

 

[F150Matt 10+ year member]

I'm not sure if you could possibly get the mounting depth but if you need to get airspace I suggest fiberglassing the entire area behind the seat...thats about the only way to maxamize the space you have. Its really not too too difficult, just takes some practice and ALOT of patience and time. Good luck.

 

[ss3079 5,000+ posts]

You wont be able to get the mounting depth in a reg.cab truck...I'm with Ranger, a cut-through would probably be your best bet. Or come up with something funky that covers your back window and is centered between your two seats near the roof of your truck

- Steve