amp for mah subs...?

[Unregistered]

yo, i was hopin maybe someone would be willing to make a suggestion or two here, i have a box with 3 10" mtx thunder6000 subs in it (sealed) and i was wondering if anypone had any suggestions for an amp, its a 4ohm load, and the rms rating on the subs is 250 i think, so i gues it would be nice to have a 300w amps or so, but yea, much appreciated suggestions would be.

thanks

-Pat

Click to read more...

 

[01price 10+ year member]

JL 500/1, should give you about 170 wRMS for each sub over a wide range of input voltages.

 

[SuckMikeHawk23 10+ year member]

if ur subs are pushing 250 rms, ur gonna want an amp in the 500-750 range. the jl 500/1 is good, so is the fosgate bd500.1, or 500.2.

 

[01price 10+ year member]

I say JL because with 500 wRMS, you might need a cap to run at full power, so the JL would be a wise investment I say because no matter the input voltage from 11v to 14.4v you will always get 500 wRMS. When the bass hits hard, the voltage may drop to 11 volts, but you will still recieve the ratted power.