..

[bw_audio 10+ year member]

..

Click to read more...

 

[maxxguy1 10+ year member]

you will need three relays two for the door locks and one for the trunk you don't need the interfaces unless you do remote start but that alarm dose not come with it

 

[qkassidyw 10+ year member]

I just did one of these the other day and it SUCKS to do an alarm in, the dash doesn't drop, you have to take out the cluster to get to any wires, and you have to take out the stereo to access wires.

Have fun hanging upside down in the car trying to solder.

 

[THUNDERBIRD 10+ year member]

eh you just pull the radio and do not disconnect it. and yank the hell out of the ignition wires and they pull out about 8" to give you enough room for the rs hook up. you have pk2 also. a 1700g and gmdlbp will do both convience and pk2, gmbp and xk06 are a great pk2 bypass. i would do an xk06 properly flashed to plxr3.0 platform and use relays and resistors for the doors and relay for the trunk. i am in michigan and will install for you if you want.

 

[qkassidyw 10+ year member]

eh you just pull the radio and do not disconnect it. and yank the hell out of the ignition wires and they pull out about 8" to give you enough room for the rs hook up. you have pk2 also. a 1700g and gmdlbp will do both convience and pk2, gmbp and xk06 are a great pk2 bypass. i would do an xk06 properly flashed to plxr3.0 platform and use relays and resistors for the doors and relay for the trunk. i am in michigan and will install for you if you want.

HAHAHA...classic installer.

Confuse the hell out of the customer so they pay you to install it!

 

[bw_audio 10+ year member]

..