2 XXX box

d_info.gif
 
boxdesign1dz.jpg


who can design a box like this or figure out port lenght and height?

or can someone check, if i have a box that is 9.7 before port, a port that is 100 sq inches and 17" lond with tunhing of 33hz is that right? and what would that leave me with after port displacement

what is the smallest sq inches of port for 2 15s?

 
Net Volume: 8.2 cubic feet

Tuning Frequency: 33 Hz

Port Width: 5 inches

Port Area: 90 Square Inches

Port Length: 19.25 inches

External Dimensions: 37 wide x 19.5 tall x 27.75 deep.

Board Dimensions and Quantity

Color Count Width Height

Top and Bottom 2 37 inches 27.75 inches

Red 1 31.25 inches 18 inches

Yellow 1 27 inches 18 inches

Black 1 35.5 inches 18 inches

Green 1 27.75 inches 18 inches

Teal 1 16 inches 18 inches

Number of 49x97 Sheets of 3/4" MDF: 0.9375

im gonna use these cutouts, except a different port at the bottom, 35.5x3x17 with 106 sq in of port

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

bamaboy

5,000+ posts
War Eagle!!!
Thread starter
bamaboy
Joined
Location
Auburn, Alabama
Start date
Participants
Who Replied
Replies
21
Views
860
Last reply date
Last reply from
skmfkr
IMG_20260506_140749.jpg

74eldiablo

    May 22, 2026
  • 0
  • 0
design.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0

New threads

Top