amplifier

$2500usd for all three Shipping and PayPal fees extra I have a few BNIB pro series in stock I'm moving. These 3 listed is a full 3way system and sub amplifiers. If its in the picture, its here. Call or text for serious inquiries 416 523 2075 Thanks John MCLSOUND

I had an inexpensive Dayton DSP-408 for about a year and that famous ground loop finally crept up on me. Was never there and suddenly it was. Anyway, once I verified it's the DSP and not something wrong with my wiring I decided I didn't want to take a chance on another Dayton, figuring I'm just...

I have a 800x4 amp on a 06 sienna, i was thinking of adding a 400x1 amp only for a subwoofer but im not sure if my car would handle the power without changing battery or upgrading the alternator, what ya think!?

Rn I'm running 12 Guage speaker wiring would that be okay or when I get the new box run 8 Guage

So I installed one of those android style touch screen radios in my car (I can find the exact one if needed but my question is pretty general) along with a sub system and now my bass is much louder than my mid audio because I didn’t realize the wattage output is so low in the new radio and lacks...

So I did a clamp test on my SIA 3500 amp and I'm getting only 1200 watts put of it so now I need to get a alternator. Any suggestions of brand I'm looking for a 350-400 amp alternator. 2012 nissan altima sr

So I have 2 sundown uv2 12s the rated power is 1750 RMS. People are recommending putting a 5k amp to the pair and a couple recommended putting 8k amp to the pair. I'm just confused how to know what amp to get

Hey everyone. I have a question about my sub amp situation and how to make it work. So atm I have one twelve one amp sounds good. But I bought another amp which isn't the same brand as the original. And bought another twelve which isn't the same as the original. Both the amps are monoblock cea...

Hi Car Audio! This will be my first time working on my car audio, so definitely need a good forum to start things off on the right foot. I have a general sense of how to get things done, but need to make sure it makes sense first, and your advice is appreciated. I already have installed in my...

Hi everyone. My oldest picked up some alpine subs and an amp from a buddy of his. My youngest wants some now. Do ya'll have any suggestions? He has polk audio speakers and a pioneer 1500 nex deck. He's into music pretty hard. So he wants sound quality 1st but probably wants loud also if you...

Number of subs preferred: 1 Size preferred (if configuration allows): 10 inch Budget:500 but can push to 1000 Power to be used (which amp(s), include which resistance): not sure Space available (take measurements, do not guess): 33.5 cubic feet in trunk with seats folded up Goals...

If I have sundown 2 12 Uv2 what amp should I use? There rated at 1750 watts each but when I talk to a sundown tech they said they could the SFB 5000.D witch is a 5000 watt amp so it would be pushing each sub about 2500 each

It has been many years since I had after market sound in my car, way back when it was just basic front, rear and a sub. Since that time I have been in a car with pretty good but not amazing sound and it does not have a modern infotainment system which is what I am upgrading to. The car comes...

Headunit stereo- Sony WX800UI 4 RCA PORTS FRONT & REAR/SUB [ATT PIC 1] Amplifier- Sony Xmn-1004 4 channel [ATT PIC 2] Front speakers- Steg Leo 650c components [ PIC 3] Rear speakers- Pioneer A1670f [PIC 4] Subwoofer- JBL BASSTUBE 1300W (300RMS) [PIC 5] [Single coil Subwoofer] Chinese 2...

As title. Once i get to about 4/5 max volume my JL HD600/4 amp goes into protection mode on 2 channels, powering my mids. The other 2 channels powering my woofers is fine. I have set the gains so there is no clipping at all even at max volume and it has only just started happening recently. My...

First of all, Hello everyone. Thanks for having me. this is my first question here. I want to run 3/ 8" subs that need atleast 200 watts each. And 2/ 5.25 rear deck speakers requiring atleast 80watts a peice. I'm not familiar with mono I know its single, and you can parallel and all that, but...

Hello I’m running two 6 1/2 Savard subs 350 rms each in a ported box under my seat. I’m using a DD amp 600rms would I hear a difference if i switch to a sundown amp 1000rms. Also I listen to a lot of Spanish music so the bass is not as hard as hip hop, so I doubt I would over power them. Also I...

Hey guys new to the forums. I have recently been installing a new system into my car and just impulse bought a stetsom amplifier. Was just wondering what experiences people may have had with them and if they do rated power. Ive watched a bunch of videos and they all seem to show them doing rated...

Hi everyone! Would someone be kind enough to help me!? It's my first time trying to install an audio system in my vehicle. The goal is to check if I'm doing things correctly, you're the experts 👌, I'm a beginner LOL. That was my project this winter, which was to learn everything I could about...

So I’m putting 2 kicker L7S 12” subs in my car they are dual 2ohm voice coils. I want to wire them to be bridged at the amp with 2 ohm impedance does anyone know what amp that is not going to break the bank that would work best to be ran at 1500watts 2ohm bridged

New system I built. Kenwood X802-5 hooked up to 4 4 ohm component speakers and 2 JL Audio 4 ohm SVC subs. I have the subs wired in parallel to present a 2 ohm load to the amp which handles 2 ohms. No power light on the amp, checked power and remote on wires, both have 12 V. Ground is solid. I...

Title says it. Both are used in good condition. Yinlong bank has acrylic case and beefy buss bars from Jim's Machine works as well as a heltec balancer. 325 shipped for the smart 5 700 for the lithium picked up I'm not exactly sure how to go sbout shipping the bank, so for the moment it's pick...

In any shape. I will consider all proposals in any condition from any country.

Brand new 210 shipped TECHNICAL INFORMATION OPERATION CLASSClass D NUMBER OF CHANNELS01 MAXIMUM POWER@ 12.6 VDC - 1 OHM: 3000W RMS @ 12.6 VDC - 2 OHMS: 1920W RMS INPUT SENSITIVITY220 mV SIGNAL TO NOISE RATIO>90dB FREQUENCY RESPONSE10Hz ~ 18KHz (-3dB) CROSSOVER HIGH PASS (HPF)10Hz ~ 90Hz...

I have a couple of these available..BNIB Will come with full warranty as all my gear does.. 8ch of power and 12ch of DSP. ..Nighthawk is a perfect sub amp at 800w in either 2 or 1 ohms. $2100 for the pair shipped.. Lower states add $35 PayPal is on you Thanks John Serious inquiries may call or...

I have a couple ESB 3.6K3 BNIB Full 6.5" 3way $350ea shipped..lower states add $25 PayPal fees are on you. Thanks John

I see a lot of people have used them and now that my bugs have been worked out I am considering moving back to the 8.9F. It has 9 channels of dsp and is more than enough power. Seems like more people would use these amps. Am I missing something that has people avoid them?

Installing DS18 Hooligan H-K02 amp to single JL 10w7-3. (750w RMS 1500w max) 4 channel recoil amp is going in for component speakers. Amp and sub specs in photo. Ran with 0 guage OFC copper. I read online that if I keep the gains low it could be okay but it’s my fault driver and don’t want to...

Had tested last week at the shop since it's been sitting in the closet for a few months. Works and sounds great. $225 shipped

Focal FDP-4.600 $450 Shipped (PP F&F) OR trade for very condition HElix M SIX https://www.woofersetc.com/focal-fdp-4-600-4-channel-600w-rms-full-range-class-d-amplifier.html DS18 EXL P2500.1 $300 Shipped (PP F&F) SOLD...

What is current draw for Punch 60IX with trigger on and no signal input?...Thanks, Jim

Hello, Looking for an amp to power my subs. 850wrms each. 1700 watts total at roughly 80% efficiency means I’m looking in the ballpark of 2125w. So far looking at the 1800w Kicker 46cxa1800.1t and the DC Audio 2k. Looking at stuff between $5-700, but open to options. Thoughts?

I purchased this car that looks to be already pre-wired. Red and black I know is power from batter, I see the remote wire and bass rj-11. What could that 4 prong connnector be in relation to an amp or sub?

Is the best way to set the gain on these Taramps to use pink noise and set the amp gain till it just clips on the little 3 light indicator? How are you all setting the gains on Taramps?

Hello All, I'm an old time SQL-head from the early 00s, having ran lots of Nakamichi, CDT, Cadence, USAmps, equipment. The new cars aren't as easy as those back then. I have a new 2023 Challenger with the butt-quality Alpine System and want to do a full upgrade. 1. What is the best Line Out...

I have a single 10” JlW7-3 in the red eye box. I want a really high quality amp that I can find pre-owned for a good price… what are the best ones you would recommend and why? factory specs: Continuous power handling 750W RMS (1500W Peak Power) 3 OHM Mono Frequency 20-250 Hz

i’m not sure what amp i should run. i want to wire 4 DS18 PRO-GM6B which are 480w max and 140w rms, i also wanted to add 4 DS18 PRO-TWX1/BK which are 240w peak and 120w rms. i’m just trying to figure out what amp or amps i should run. thank you.

Hello Everyone, I'm looking for some assistance. I have an 2004 RX330 with a stereo that emits an extremely high pitched whine - the frequency of the sound will change when moving the radio dial and reaches frequencies that my old ears cannot register, but others can hear it. The stereo...

Hi! Bugging you guys once again. I'm looking for an amplifier for a subwoofer since my old one finally gave out. My subwoofer is Gladen SQX 12, and I want to drive it at its max power ( 600rms at 4ohm). ( I usually listen to pretty loud music and also I like all the bass i can get) I dont need...

Hey everyone. I'm new here so I don't know how this works but....I'm looking to buy a Crossfire BMF1000D amplifier. If anyone has one for sale please hit me up. SERIOUS BUYER!!!