Search results for query: *

I was driving and both front stage, sub amp and speakers ran off deck stopped working at the same time system wasn't turned up even half way. There is no power at the amps fuse are good when I disconnected the batter and hooked back up speakers ran off deck started working again but still no...

On my way to school this morning my front stage amp went into protect at full volume 62 out of 62 i checked the volume with a scope when setting gains and this isn't clipped. Set all other gains with scope also so nothing is clipped. But if I turn the h/u off and on speakers come back on and...

http://www.caraudio.com/forums/vertex-audio/612083-getting-most-out-any-electrical-system.html This has a great alternative to h/o alt increases voltage for pretty cheap

Thanks trumpet that's what I was looking for when I searched it nothing like that came up

I am getting a dso scope and want to make sure the test tones I use are good. I'm not That confident in the quality of the ones I have found on the Internet seeing how they all sound different at the same "frequency". So any recommendations on a good cd or a reliable site to get tones from would...

For the instal kit I would go with knukonceptz you can get the 8 gauge kit for $20-30. Also I would go with something like the soundqubed q4-90 it is only $30 more and 40watts more per channel

Thanks for the replie just got done and it is rattle free

I am having the same issue with the rear deck would I put the ccf in between the plastic and the metal or attach it to the metal In the trunk

Keep hope Alives ideas are awesome but I just went through the same thing two hours ago and I ended up putting them in the kick panels there was just enough room in

I also couldn't find a distribution block so I just ran separate power wire to both of my amps with their own fuses in line of course

Also all you have to do is Google stereo wiring diagram for your car make model and year and it will give u a list of wire colors and purpose

I got a Bluetooth h/u off ebay for $67 dollars and it works perfectly nothing fancy but does everything you need and there is no issue with your car I would recommend getting a pigtail connector so you don't cut into the hard wiring of the car you can get them at any audio shop or off the...

I'm pretty sure ssa has them in stock at least they did a couple days ago

Thanks I hadn't heard of the voltage rise using a resistor great idea

I have been looking for an amp to run my rf power hx2 (1000watts rms underrated) and I think I have decided on the incriminator 10.1 I know there won't be much if any audible difference but does anyone know what kind of wattage these amps actually put out every one says they do over rated power...

Is the only difference between the v.2 and v.1.5 the fuses as in stable down to .5 or at least 1 ohm I saw it has a different board is why I ask

I think the 10's would be louder but out of the two I like how the power sound way more and the power can handle quite a bit more than its rated I tried to give my punch a lil more than rated and it didn't do very well

Anyone had any experience with the amps I listed or other good ones Input would be much appreciated

I saw in a post from a couple months you had the bk 1800 do you still have those

I saw your add but when I looked it up it said 1000 @1ohm and drop 14.4 1800 @1 ohm do you think a 180 amp alt h/o for my civic and big 3 would be enough electrical for this amp

I am wanting a 1200-2000 watt amp my current needs are around 1200-1500 but would rather have overhead for future plans. The sub I am running now is a power hx2 dual 2ohm so want to run at 1 ohm i have about 300 to spend. I have been looking at the crescendo symphony 1500, ppi bk 1800 although I...

The 3.7 does account for sub displacement and it is a single 15. I found some 6" pvc for cheap thankfully so I can do that size port after displacement the final volume will be 3.45^3ft that's the 6" x 15" added an inch because I'm going to make a flare on one end will this be a good size port...

Awesome thanks for the reply

So do u think the 8" diameter sonotube would be legit at 3^3ft

After port displacement with the 8 inch diameter port the volume would be 3^3ft with the 6" diameter port it would be 3.5^3ft would it be better to go with over kill than to small also I can get sonotube for cheap at 8" diameter so that could work budget wise what do you think @Snapper_Slapper

I am building a box with round tube port the person that helped me with the design suggested 6" diameter by 14" long port due to that size only being available in sections that cost $50 I have to use 4" diameter tube when I did the port calculator it says the port only needs to be 5" long and I...

Ok thanks a lot

So I just picked up a power Hx2 15" for $50 I want to put it in around 2.0 or 2.5^3ft tuned to between 33 to 35hz. It is going in a civic so limited space can be about 32w x 16 1/4h x17 1/2d I don't know how long I'm going to keep it (getting a new 12 soon) so I was thinking about just doing a...

Does it come with the bass knob with clipping light?

I want to build ported box for a xfl 12 but haven't been able to find much info on specs this will be my first box build (I have built houses though so not to worried about construction) I just want to get it right. I have a civic coupe I can only clear about 16 1/2in in h and around 30in width...

Thanks for all the replies

Does the fi ssd compare to the xfl on paper the ssd look good but idk or heard much about them

I can't find the tantric md or hd any ideas where I can check them out. The xfl look good is it really oval it doesn't look like it in the pics but one discription said it was.

Do you think the sa would do alright on 1000 watts in that big of a box I know they can handle more than the rated power in 1.75 cube box I wasn't sure at 2.25 though

I already have An amp its a Boston gt-1000 I already have a lethal injection 10" I really like ( the 600watt version) and am considering the new 1000 watt version but would like some input on other good subs in the 200-300 price range. I am looking for a single 12" that gets loud and is...

So I have a incriminator Li running at 1ohm on a rockford t-500bd I set my gains with multi meter test tone at 400watts I turned it up for about five mineuts and I smelled the voice coils a little is 400 just to much power for the break in period it only has about 2 hours on it I have owned a...

I am looking for opinions on a good sq amp that is less than or around 500 if that's possible I know it cost more for sq. needs to be 600 watt rms at 4 ohms for a svc jl w3 13.5 the sub will get upgraded later thanks

What do you mean like the car was idling so it probably wasn't putting out 14v

I was setting the gains on my amp a boston gta-704 rated power is 70x4 watt rms and I was setting it to 65 watt rms at 4 ohms the math says the multimeter reading should be 16 or so I rounded down but to get this reading I had to turn the gain up to around 3/4 and on just about every amp I have...

Has anyone tried a lab slap box I'm getting one for. Jl 13w3v3 it's built to perimeters for the sub for pretty cheap just curious if anyone has any experience with them