Sidebar

Search results

  1. P

    Box design help

    Any reason for the aeroport over slot?
  2. P

    Box design help

    Correct, it’s supposed to be 14x28x14. It’s for a friend and he gave me wrong dimensions. The box will be in a 2004 tundra sitting on the 14x14 side with subs and port forward.
  3. P

    Box design help

    2 sundown e-10s Sundown SFB-1000D Box dimensions 12x12x28 with a slot port. Subs up and port up or out the side.
  4. P

    Door speakers stopped working

    All 4 at the same time though?
  5. P

    Door speakers stopped working

    Need some help with trouble shooting. My door speakers and tweeters were working fine one day and the next none of the door speakers are putting anything out. The tweeters still work fine but all 4 door speakers are silent. It’s the stock speakers but I have a Sony wx-920bt radio. The radio has...
  6. P

    $500 setup

    What about an aero port setup?
  7. P

    $500 setup

    A buddy of mine is wanting to get some new subs for his 2005 Tahoe. He was thinking 2 15’s but I don’t think he’ll get as much bang for his buck since he’s starting from scratch. What’s yalls advice? He needs everything except a head unit; subs, amp, wiring, box, etc
  8. P

    Value of setup

    I know how much the subs amp and port are worth. I’m mainly asking for the box. Bc I built it not bought so how could I find that price?
  9. P

    Value of setup

    Not selling on here! Only seeing what y’all think it’s worth.
  10. P

    Value of setup

    Yeah Ik I won’t get full price for all of it, but by custom I meant i built it. The 900 is just in materials for box+subs+amp+port
  11. P

    Value of setup

    eBay? For a whole setup yeah not gonna find. Wasn’t asking to sell it on here just asking if anyone knew what it was worth. Since you clearly don’t know then you should’ve just kept scrolling instead of wasting your time lol
  12. P

    Value of setup

    No clue what category this is supposed to be in so I just put it here lol. Anyways I’ve been thinking ab selling my setup and rebuilding, but I have no clue what it’s worth all together. -2 sundown sa-12 rev3 -custom 5ft^3 box with 8x25 inch aero port -smd box terminal with 8 gauge speaker wire...
  13. P

    New door speakers

    Looking to get some new door speakers. Will be on head unit power for a month or two then I will get an amp for them. 6x9’s in the front and 6.5 in the rear. Hoping to stay below $150 if possible. Also are 3 way coaxial any good?
  14. P

    How does this even happen

    This is what’s left of my fuse holder for my alternator. Any clue of what could cause this?
  15. P

    Electrical help

    So the only way to fix it would be a new alternator?
  16. P

    Electrical help

    It’s 1/0 sky high ofc. Still stock alternator Bc I haven’t had the money to upgrade that just yet. the voltage will go from around 14.1 to 13.7 then back to 14.1 then down to 13.5 then back up with nothing Running
  17. P

    Electrical help

    It’s not bouncing around super bad. Around .3-.6 volts
  18. P

    Electrical help

    2005 Tacoma
  19. P

    Electrical help

    I did the big 3 ab 7 months ago and noticed my voltage bouncing around a lot so I checked the wire going from the Alternator to the battery and it was really hot. What would be causing that to happen?
  20. P

    Electrical upgrade

  21. P

    Electrical upgrade

    not trying to sound rude but you are no where near correct. The voltage does not drop and stay at 9 volts. it only does it on a low part of the song then goes right back up to 13.8v. The only way to get the amp out of protection is to turn it off and back on and I’ve done it several times and...
  22. P

    Electrical upgrade

    1ohm final load. Trucks doesn’t shut off. Just amp
  23. P

    Electrical upgrade

    Yeah. The amp gain is set to half. HU is a Sony wx-920BT
  24. P

    Electrical upgrade

    Yeah I understand what you mean. Gains at half right now and bass boost is barely on. Plus I have a bass knob so i only noticed it was going to low when I’m showing off lol. Found a super low song on YouTube to demo it for my buddy and pushed it to hard and hit 9v apparently Bc my amp went into...
  25. P

    Electrical upgrade

    I know the alternator is the best bet, but I’m still in high school so I don’t have $500 laying around for one.
  26. P

    Electrical upgrade

    2005 Tacoma. How big of a battery do you think I’ll need?
  27. P

    Electrical upgrade

    I’m currently running 2 sa-12v1’s on a taramps md3000 and a 1/0 big 3. When I turn them up, the voltage drops to 11.5. The voltage normally sits at about 14.3 at startup and 13.8 later on. What’s some cheaper options to get that voltage up?
  28. P

    Taramps Md3k or Hd3k

    I’ve heard some bad things ab the HD series, but figured I’d ask on here. Also should I get the 1 ohm or 2 ohm version? It’s going with 2 sa-12 v1 4ohm in a 4.3ft box.
  29. P

    Sa-12 box

    Okay thanks man! It’ll be a few weeks before everything’s together but I’m gonna start on the box next week. Thanks to the others for the help too!
  30. P

    Sa-12 box

    Yeah it will work. Sa’s only have ab a 7inch depth, but I wasn’t thinking for some reason😂
  31. P

    Sa-12 box

    I was saying on the side panel of the box, where should the port be located? In the middle, to the left, to the right, or does it not matter?
  32. P

    Sa-12 box

    Gotta say I love the sketch😂, but thanks! I get it now idk why I was so confused by that. I guess I didn’t think ab it’s gonna be 2 foot high. Lol. Last question and I’ll leave y’all alone. Port to one side or just in the middle?
  33. P

    Sa-12 box

    Thanks! I’m a little confused though. So if the port is on the left side of the box going towards the subs, won’t it hit the subs?
  34. P

    Sa-12 box

    33w 24h 25d. And yeah where the seat bracket bolts in I’ll gonna bolt a board to it and somehow get the box to the board. It’ll be trial and error really lol
  35. P

    Sa-12 box

    Okay thanks! Sorry for so many questions, but you think the box parameters on that cut sheet would work good? And what ab sub position? Wouldn’t the port run into the subs?
  36. P

    Sa-12 box

    Okay. Just to make sure, you’re saying put box on the driver side, and have subs up with the port towards the passenger side?
  37. P

    Sa-12 box

    So what would you recommend box size and where to get the port from?
  38. P

    Sa-12 box

    I don’t know much ab aeroports. I want something thats gonna get deep and not just be super airy if that makes sense. That’s why I was leaning more towards vented port.
  39. P

    Sa-12 box

    Toyota Tacoma. I’m removing the double seat and mounting it to the floor
  40. P

    Sa-12 box

    What would you recommend then? I’ve tried playing around with other box calc but they don’t really work to good

Latest threads

20230318_193317.jpg
Screenshot_20230604-143812.png
20230320_142838.jpg
0604231153a_HDR.jpg
IMG_20230531_114918589.jpg
IMG_20230531_114912392.jpg
0.jpg
RMS.png
1.jpg
3.jpg
rockville.jpg
Screenshot_20230530-071216.png
B4A8944A-1B97-42F9-844B-17C3EE43CE74.png
402CD89D-AB45-4261-82D1-EAC29E3AE544.png
Rim.jpg
Top
Menu
Home
Refresh