Search results

From what im reading these are some of the greatest audiophile grade speakers the late 90s produced

Lol I'm going to run them active, but yea there heavy as hell too

They don't make em like this anymore

Erm i would say 165+ actual shipping, not sure how much that would run there some pretty hefty dudes. Take trades on some components or good HU

the optidrive is a much better amp, will someone else chime in with there opinion please?

This is the best you will do, its manufacture referb. Your not going to find a true 1200wrms cheaper then $140. This is a decent amp for sure, i dont think anyone will disagree with me. Optidrive 1300 Watt Mono Block Digital Competition Class Amplifier OPTI1400D | eBay

In my experience if you go cheap you will just buy the better one soon after so get a decent amp the first time. Typically would say go ahead for the 1200 now other wise ull regret it later but a 600-800 watt amp would push the subs you listed plenty. This hobby gets addictive and you find...

Ive got a couple werker AGM group 24 batterys, about a year or so old very few cycles. That XS is rated for 65 amp hours, these are 80 amp hours.

100 is really low for a quality amp, 250-350 is what a decent 1200wrms will run you. Soundqubed has a good 1200 for little under 250. Might wanna shop used out of our forums or consider a lower wattage amp. The subs are only asking 500wrms, so maybe 600-800 range.

I always use liquid nails

Is your box sealed or ported? You should set your gains with a meter or better yet oscope if you can. So you can always adjust the amp to whatever power output you want. Although your electrical is going to effect this, that amp ONLY puts out 1200 watts at 14V. If you have a 80A alt and bass...

Trades? I have a tantric MD 12 in good shape and another that needs recone Also a DD SW6.5 in CSCStang box

I have one off a tantric MD, is blk though

My 95 series DD seems to be handling my 20.1 pretty well

Nice amp, I find one already

Still here

There dual nputs but there connected internally, its just to make wiring easier. Most monos have two inputs.

the FSD audio amp i showed you its 700wrms at 1 ohm and around 500 at 2. So more then enough power for right now then later you can get bigger subs in single 2 ohm or dual 4 ohm and get 700 from the amp. Its 140, better then the RF for sure

no, you want a mono amp. Meaning one channel, then you wire the subs together. Will be a cleaner sound, you get a subsonic filter, and use less power to make the same wattage. Look for a 300-500wrms @ 2ohms rating from a quality amp.

nope, honestly its probably the same manufacture. The ONLY AMPS from lanzar that are worth anything are the opti-drive series

thats like buying your headphones from dollar tree, do you think there going to sound good?

any amp under ~120 is garbage, and thats a 500wrms range

This is as good as your going to do unless you go used or find a closeout deal. Amazon.com: FSD Audio FZ700D 700-Watt Class-D Monoblock Amplifier: Car Electronics

Still here

Would trade for Honda prelude coilovers or good struts

Bump Also interested in 6" component sets

Db-r in Texas will fix it

575

Item(s) for Sale: IA 20.1 Item(s) Description/Condition: Mounted once and played 5hrs tops, its more amp then my sub stage can handle. Trucks clutch went out a week after install and has been sitting since. Need to sell amp to cover repairs. Amp has never dropped below 13.2V. Price: 600 obo...

Get an active six channel amp and some raw drivers like silver flute 6.5s. I hear sea prestige has good tweets, madisound has both.

Wow so yea refab the whole door mount, well i just looked at the silver flutes 5 1/2. Seems to match pretty close, think i may try them.

Eh undecided, looking to keep it on the cheap but ive been know to fork out for good deals. I just measured the hole i have to mount my mid into, speaker needs to have a cutout of 5 or less and overall basket must be 6 1/8th or less. Really a odd size.

1999, I cut the back basket out so the magnet would fit already. Just can't get any 6.5s to fit in the recessed hole

Looking to change my door speakers outs, only issue is its a Honda prelude so the speaker sits in the recessed door panel and its an odd size. Max overall size is 6&1/8th inches Cutout for speaker is 5 inches Its listed as a 6.5 speaker, but I have tryed a fosgate prime I had laying...

Post video

Looking for some smaller 6.5 mids, max mounting depth is around 2in. Also the overall size is very limited. I know my hertz HV-165 woofer wont even hit in the door panel. Speakers are going into a 99 Honda Prelude, will be ran active. Tweets undecided

What motor though?

What no one would believe. 3.7L v6 stick no big 3 with all 0 ofc wire and a AGM under the hood. I think it's g34 energizer. Nothing below 13V at red lights, that's on a DD 9512 maxing out the sub. Sub cant handle the amp full tilt, it's a ridiculous amp.

Dayton>JL

I have a mint shape Tantric audio MD