Jump to content


shelbynook1972

Member
  • Content Count

    3
  • Joined

  • Last visited

  • Feedback

    N/A
  • Country

    United States
  1. The 530t is so simple, I still cannot find what's causing the issue...All connections (and wiring) to windows tested OK. Constant 12V rewired(12 gauge) direct to battery-OK. Regrounded all 3 wires together-OK. Retested module in another car-OK. Any ideas at all would help out & be much appreciated.
  2. Still no luck here...Anyone have any ideas?
  3. Have had 530t installed (96 BMW Z3) for yrs w/ no issues until recently. Now no response from window switches, no one touch, non responsive via Python 872 alarm or remote (alarm+remote work fine), no relays clicking & no movement. TESTING I'VE DONE SO FAR: MM: Multi Meter *Tested w/ a 530t from another car & same non responsiveness...Both 530t modules verified working. *When Wired OEM – windows work normally (non binding regulators both greased & operating smoothly). *Windows wired to 530t as below – does NOT work at all. *Rewired 530t AC(RED Constant) w/ 12 gauge + Re-grounded 530t gound wires(3to1). *MM Window Switches as wired below – BOTH switches, BOTH directions – 12v OK. *MM 530t module harness – RED 12v Constant – 12v OK. *MM 530t module harness – NO/ZERO voltage @ any up/dwn wires, either harness, both directions. *MM 530t module harness – Ground/Continuity, all wires, either harness – OK. CPL ?'s... -Can the alarm(Python 872) cause these issues? -Can these connections cause any issues?: 530t ORANGE to 872 ORANGE GROUND WHEN ARMED OUTPUT. 530t RED/WHITE to 872 VIOLET/BLACK AUX 1. I have limited experience w/ alarm/stereo DIY installs but the 530t, which I installed originally, seems quit simple yet I cannot deduce what the problem is. Hopefully someone can add there expertise & advice, which is much appreciated. CURRENT 530t INSTALL – 96 BMW Z3: 872 settings: Comfort Close to OFF. AUX 1 set to Valid & Armed.. 530 settings: Not sure which type windows(A, B or C) the car has. Dips set to Factory & #5 Dip is set OFF. . DRIVER (side 1): Window UP(motor 1) GREEN to BLACK - MOTOR side UP wire. Window UP(switch 1) BROWN to BLACK - SWITCH side UP wire. Window Down(motor 1) BLUE to VIOLET - MOTOR side DOWN wire. Window Down(switch 1) WHITE/ to VIOLET - SWITCH side DOWN wire. PASSENGER (side 2): Window UP(motor 2) GREEN/BLACK to BLACK/GRAY - MOTOR side UP wire. Window UP(switch 2) BROWN/BLACK to BLACK/GRAY - SWITCH side UP wire. Window Down(motor 2) BLUE/BLACK to VIOLET/GRAY - MOTOR side DOWN wire. Window Down(switch 2) WHITE/BLACK to VIOLET/GRAY - SWITCH side DOWN wire. 530t ORANGE to 872 ORANGE GROUND WHEN ARMED OUTPUT. 530t RED/WHITE to 872 VIOLET/BLACK AUX 1. OEM WIRING: DRIVERS SIDE(side 1): UP – BLACK DOWN – VIOLET PASSENGER SIDE(side 2): UP – BLACK/GRAY DOWN – VIOLET/GRAY
×