Jump to content


  • Content Count

  • Joined

  • Last visited

  • Feedback

  • Country


About bajbass

  • Rank
    Junior Member
  • Birthday 05/10/1982


  • Location
  • Audio System Setup
    scv1500d,PPI Phantom 900.4,alpine 164bt deck, 1 Sundown sa 12, polk mm tweets, crossfire mids
  1. bajbass

    Prv vs Crescendo vs ds18 neos

    I finally sold the powerbass 6.5 pro speakers and looking to get something clearer and louder options im looking at are... Prv 6mr500 Crescendo 6.5 or 8 Ultra neos or the ds18 neos im probably going to put the mids in with the massive ct2 tweets and later on add midbass drivers i currently have a ppi 900.4 and a pioneer gm-d8604. Heard good things on all of the speakers above so anyone that have experience with any chime in with their opinions
  2. My old vehicle (2006 subaru impreza wagon) had a ecu control crap on the alternator too but it usually charge constant if it senses electrical load on the system(headlights,park lights, A/C etc) so to solve the problem i ran the blower in the car at low speed during the daytime and it would constantly keep charging
  3. Ok so i found these speakers locally that are suppose to be midbass... are these any good https://www.parts-express.com/faitalpro-8fe200-8-professional-midbass-4-ohm--294-1170 and also im thinking of getting the PRV 6mr500 instead of using 8 inch midrange...and just buy a pioneer gm 8604 and bridge it or just bridge the ppi p900.4....and use the pioneer to power tweets and midbass..
  4. Lol nice I can't even touch 100 hz @ 24db but I mean the lpf on the midrange
  5. Well not sure I could find any dedicated mid bass driver but I'll look around...Another question do you usually lpf cross pro audio mids higher than regular car mids since these speakers have a responce up to 10 kHz...? Right now I have them cross at 4000 k @24 linkwitz Riley filter
  6. bajbass

    Massive CT2II's

    I just realise that i have the stage 2 version tbh they are the best tweeters i ever own.....Just make sure as Jeff said to keep them on axis sounds way better in my suv makes my shitty powerbass mids sound decent with a nice detail cant wait to hear them on better mids...they get loud too with power on them.
  7. well i got them to sound a bit better but still looking to replace them with 8s but since i live in the caribbean its a challenge getting my hands on any crescendo gear unless i pay a shit tonne of shipping and duty.....choices are limited locally...but what i can get my hands on are basically DS18 8 pros or neos , powerbass ,power acoustic...,precision power may find pioneers and ground zero. But the ground zeros cost a fortune even if its worth it idk but are the ds18 mids any good....? btw i use rca and bluetooth sometimes but handling the phone while on the road for volume and sound selection is a pain in the a**
  8. So the taramps md or hd 3000 full range amps are good amps for subs and do the still do rated and efficient in the sub range?? If so I'm considering to use 1 on my 2 ab xfl 12s seeing that they are so reasonable on Amazon...
  9. Btw I have a dayton dsp and a precision power phantom p900.4 for now ...planing to bridge it into stereo to get at least 450 x2 then get a stereo amp or so to power the tweeters.My doors are extremely deaden but starting to wonder if the door panels causing the freaky response since the grills on the panels don't line up perfectly to the front of the speaker..
  10. well i have measured the powerbass mid out of car in small bookshelf box i made and came up with this graph
  11. Well since i have my bass where i want it be (2 12 American bass xfls ported) i need to get my mids to keep up currently im running these https://powerbassusa.com/us/en/products/mobile-audio/xpro-6-65-Octagonal-mid-range-driver-4-ohm/ along side a pair of massive ct2 tweeters. The problem is like every 6.5 pro audio speaker i cross path with there is a huge nulls and peaks in the frequency responce when i measure in rew which sounds annoying and horrible without heavy eqing.I find i need to cut 1.3khz by 11 dbs to get it near flat responce then there is still big 8 -dbs null around 700 hz i think .....then they dont get as loud after heavy eqing.My question is do i get 8 inch better pro audio speakers like the crescendo un 8s with more power behind them or get multiple car audio midbass/midrange 6.5s in each door whice sound way better without much eqing...
  12. bajbass

    Not SQ but not SPL?

    Yea the dayton dsp uses Bluetooth 4.0 aptx so the sound quality suppose to be near or equal to cd quality or so they claim...well i tried it with my phone with flac files and it didnt sound too bad at all
  13. bajbass

    Not SQ but not SPL?

    So using the rcas in my dayton dsp is a waste of time....? And Bluetooth is the only way to go
  14. bajbass

    what are the best dsp for the money right now?

    Ok so i downloaded both dayton and the dsr1 apps for the price dayton isnt bad but the dsr1 have more bands of eq to adjust more cross over slopes to choose from... plus the dsr1 has bluetooth built right in while with the dayton u have to buy a separate bluetooth dongle to connect to a phone or tablet hmmm
  15. bajbass

    what are the best dsp for the money right now?

    well seeing the dayton is new cant find much vids with the interface but the dsr1 has built in bluetooth and looks like it has tonnes of flexibility for just 250