Jump to content

AnthonyMartello

Imported Banned Users
  • Content count

    28
  • Joined

  • Last visited

  • Feedback

    0%

Community Reputation

1 Neutral

About AnthonyMartello

  • Rank
    Banned
  • Birthday 09/10/1989

MORE INFO

  • Location
    Cantrall, IL
  1. AnthonyMartello

    Need help installing LED strips

    Hello Community, Following tips are very helpful for installing LED strips. They are: 1. Open up the cover that way in the back behind the gas and break pedals. 2. Use the wire clothes hanger take it apart and wrap the LED strip electric wires around it so it can push the wire up thought the hole and reach it near the battery. Make sure to leave enough slack on the other end in order to have enough room to work with. 3. Connect the fuse holder to the positive side of the battery by unscrewing the nut on the battery. 4. Put one of the wires from the fuse holder into a wire connector and put the connector around the bolt like this. 5. Plugged in the fuse holder, use a wire to wire connector and connect the wire that brought up through the firewall hole and connect it to the other end of the fuse holder. 6. Mount the LED strips underneath the dash on both the drivers side and passengers side to the desired positions using the back 3M tapes. 7. Run two separate pieces of wire from the drivers side to the passengers side. These will be connected to the positive and negative wires of the LED strip on the passenger side. Again don't forget which wire is the positive, which is the negative. 8. Run the wires through from the passenger side to the drivers side connect the negative and positive wires from the LED strip on the passenger side to the wires you just ran through. 9. Install switch and test it and then enjoy the lights. Best Regards, Anthony Martello Motorcycle LED Lights
  2. AnthonyMartello

    hid capacitors

    Hello Community, Capacitor King always keep in mind the best interest, of the professionals, who repair HID Lighting. We are also in the electrical, sign and lighting repair business that is why we care so much about customer service, troubleshooting information, and quality components at the best price. In the useful information section is information for troubleshooting HID ballast transformers, capacitors, ignitors, lamps, sockets and more. The data sheet tab has a list of the proper component sizes for most metal halide and High Pressure Sodium applications. Best Regards, AnthonyMartello Lighting Motorcycle
  3. Hello Community Members, The switchback LED bulb is powered with High Power LED chip plus the magnified projectors in front which makes this LED bulb 2 to 3 times brighter and shaper than conventional LED bulb. It will light up the parking lights in bright Xenon White and turn signal lights in bright Amber Yellow. One pair 4W High Power Switchback White/Amber 3157 LED turn signal light bulbs. If you are using these LED bulbs for turn signal lights, you might need to add a pair load resistors to prevent hyper flashing or malfunction problem. Best Regards, Anthony Martello Motorcycle LED Lights
  4. Hello Community, I have an 04 Cobra and put new headlights in the other day, and the colors of the cobra are red and black. I wanted to replace the white/blue halo light with red LEDs. I know it would be illegal to drive with them on. If anyone having any idea relating this topic please suggest me. Best Regards, Anthony Martello Strobe Lights
  5. Hello Community, LED lighting has become increasingly popular in recent years, mainly due to the improved visibility and safety that it offers compared to traditional incandescent bulbs. In addition to providing safety benefits, LED lights are unaffected by vibrations that can damage traditional tail lights and tend to have a significantly longer lifespan than normal bulbs. There are three basic types of LED lighting available for your motorcycle: accent lights that can be mounted anywhere, pre-formed accent lights that correspond to particular makes and models of motorcycles, and LEDs that replace stock lighting. When it comes to universal LEDs that can be mounted anywhere on your motorcycle, there are many options available. You can choose pods, small clusters of LEDs available with varying numbers of LEDs; light bars, strips of LEDs for mounting in long, narrow areas; flexible arrays, similar to light bars, but flexible for mounting to curved surfaces; and single LED bulbs. LED lighting provides similar illumination abilities to traditional light bulbs, but they do so at a much lower power draw than regular bulbs, and they last much longer. Most LEDs will never need replacement. Best Regards, Anthony Martello Motorcycle LED Lights
  6. Hello Community, I live in MD and I want to make my bike more visible at night with some accent lighting. Does anyone know any laws or restrictions that exists? is accent lighting even legal? If anyone having any idea relating this topic please suggest me. Best Regards, Anthony Martello LED Lights For Motorcycles
  7. Hello Community, Motorcycles are typically less visible than cars, trucks or other automobiles on the road--especially at night. Because of this, there are many regulations set by law and other standards of production that detail motorcycle lighting requirements. These regulations help make a motorcycle as visible as possible while providing the best visibility for the motorcyclist. Headlights: Headlights, as with nearly all vehicles, are the brightest and most visible lights on the vehicle. Headlights also provide the most visibility for the driver. The common law for a motor vehicle's (including motorcycles) headlights states that they must be mounted at a height of no less than 22 inches and no more than 54 inches. There is no single standard for maximum intensity of headlight lighting because the abundance of manufacturing design make it nearly impossible to regulate. However, federal law states that headlights cannot be red or blue or beacon lights, including the conduction of flashing or alternate lighting. Nearly all states also require daytime working headlights for motorcycles. Rear Lights: The rear lights on a motorcycle include the night and daytime running lights and the brake lights. Break lights, as with any operating vehicle, are legally required. These lights are required to be red, but are subject to a leniency in the variation of color red. The break lights are required by federal law to be clearly visible during the night and day. However, the running lights are only required at night. Turn Signals: Only a few states allow hand signaling on a motorcycle. However, nearly all motorcycles built within the last 30 to 40 years have been designed and equipped with turn signals. Federal turn signal requirements merely state they cannot alternate in color and may only consist of yellow or white color. Additional Lighting: Additional lighting may be added to a motorcycle, but there are certain laws restricting the type and function of additional lighting. The law states that any light on a vehicle, other than a headlight, cannot produce a beam with an intensity greater than 300 candle power and not reach a point of the roadway beyond 75 feet of the vehicle. These lights also may not conduct flashing or alternate lighting. Best Regards, Anthony Martello Lighting Motorcycle
  8. Hello friends, I need to put led lights on the exterior of my car, but they need to be connected to a power source. How do I connect it to the battery? I'm trying to put lights under the door handle, on the tailpipe, on the license plate, and on the side view mirrors. If anyone having idea relating this topic please suggest me. Best Regards, Anthony Martello Strobe Lights
  9. Hello Community, HID headlights are available in many colors, which are denoted by a kelvin color temperature. If you look at a real Kelvin color temperature chart, you will quickly realize that it is not consistent with after market HID kits, however, you can use our color chart to determine what color is right for you. If you wish to get a factory look like what you see on newer luxury cars, you should go for a 6000k or 6k HID kit. Generally the higher the number the bluer the color. Best Regards, Anthony Martello LED Lights For Motorcycles
  10. Hello Community, Headlights play a vital role for a motorcycle, as many models rely on a single bulb. A blown headlight bulb can leave you in an extremely hazardous situation. At the very least, you may become stranded and unable to get to your destination. Replacing your headlight is relatively simple, but you will need a replacement light bulb and a screwdriver. Some motorcycles also require a wrench to remove the headlight. If your motorcycle has any storage space, you can use it to carry some useful tools such as a flashlight, a spare bulb and a basic tool kit. 1. Remove the circular rim that holds the headlight lens in place. Use your screwdriver to undo the screws that secure the rim and the lens. If your rim is fixed using nuts and bolts, use a wrench to loosen the nuts before pulling out the bolts with your hands. Carefully remove the rim and the headlight lens, and place them on a flat surface. 2. Pull the bulb, along with the wires attached to it, out of the headlight shell. The wires stretch out, but remain attached to the headlight, so don't worry about the bulb falling to the ground. 3. Push together the holding pins at the bottom of the bulb fitting. Pull the bulb out of its socket while pushing the pins, and remove it completely. 4. Insert your replacement bulb into the bulb socket. Listen for a clicking sound from the pins that confirms the bulb is correctly in place. Gently feed the wiring and the bulb back into the headlight shell. Return the bulb and wiring to the correct position inside the shell, as they were before you pulled them out. 5. Place the headlight lens back on the shell, and put the circular rim over it. Use your screwdriver to insert the holding screws back into the rim. Tighten the screws to secure the rim and lens properly. If using nuts and bolts, feed the bolts through the rim and tightly screw on the nuts with your wrench. Best Regards, Anthony Martello:) Motorcycles Lights
  11. AnthonyMartello

    Seat covers?

    Hello Community, DriveWire is the ideal solution for transferring the data from a desktop or notebook PC to a new hard drive in a few easy steps. It makes what can otherwise be a daunting and tricky process, painless and easy. Marathon Seat Covers has been designing and manufacturing custom seat covers for trucks and SUV's since 1978. It make the best fitting custom solid and camo seat covers for every major truck and SUV on the market today. Whether you've got a Ford, Chevy, GMC, Dodge, Toyota, Nissan, Subaru, Jeep, Honda or Hummer. Best Regards, Anthony Martello Motorcycle Lights
  12. Hello Community, I know that I've seen people get pulled over at Bike Week for having red or blue led lights on their bikes, but I'm wondering what colors are legal? Are white lights is safe for the bikes? If anyone having any idea relating this topic please suggest me. Best Regards, Anthony Martello:) Strobe Lights
  13. Hello Community, There are three basic types of LED lighting available for your motorcycle: accent lights that can be mounted anywhere, pre-formed accent lights that correspond to particular makes and models of motorcycles, and LEDs that replace stock lighting. When it comes to universal LEDs that can be mounted anywhere on your motorcycle, there are many options available. You can choose pods, small clusters of LEDs available with varying numbers of LEDs; light bars, strips of LEDs for mounting in long, narrow areas; flexible arrays, similar to light bars, but flexible for mounting to curved surfaces; and single LED bulbs and LED lighting comes in every primary color. Best Regards, Anthony Martello Lighting Motorcycle
  14. Warm wishes to everyone, I have a light weight motorcycle and park on the road outside my house. During windy weather conditions my bike often gets blown over to my annoyance. Is there a device or piece of kit I could buy to secure the bike so it doesn't get blown over? If anyone having any idea relating this topic please suggest me. Best Regards, Anthony Martello Motorcycles Lights
  15. Good wishes to everyone, Radar detectors are tough to evaluate. A large variety of models and brands are used by a wide spectrum of users-from truckers to weekend warriors-each of which has their own ideas on what works best. In the last couple years, the technology has changed tremendously. The hardware keeps getting smaller, but not so small that will disappear any time soon. The hardware required to detect the microwaves emitted by police radar equipment won't fit inside of a smartphone. Best Regards, Anthony Martello LED Motorcycle Lights
×