FEATURED Hyundai Cilantro.. I mean Elantra!

Looks decent in the car. The A-Pillar is held in by a tab at the bottom and three press in plastic fasteners. I took some fast hard corners and she stayed in place. I am happy.

20220622-160129.jpg

20220622-160135.jpg

20220622-160152.jpg
Hmmm. Speakers next to a vent?? Not sure Id do that. My truck flows regardless if I have the selector on or off. Defrost for your side windows I guess. Id prob raise them about 4 inches min. Be closer to the ear level, Thats me, Still looks badazz though. Sound to the user is all that matters
 
Hmmm. Speakers next to a vent?? Not sure Id do that. My truck flows regardless if I have the selector on or off. Defrost for your side windows I guess. Id prob raise them about 4 inches min. Be closer to the ear level, Thats me, Still looks badazz though. Sound to the user is all that matters
It's hard to see but that is the defrost vent for the side window. I made sure the mid was high enough above it that it didn't obstruct the air flow. The full air flow does still hit the window.
 
Allrighty then!!! I removed the license plate lights housing and sound deadened behind it with the 80mil and added some Noico Re3d 150mil to the inside of the housing. I also took care of the license plate and mounting area then added some to the deck lid. I added some Noico Red to the insides of the holes under the lid but it's hard to flip over and take pics. The rest is what you see. Closing the trunk now sure sounds different.

20220628-125510.jpg

20220628-131735.jpg

20220628-132306.jpg

20220628-132654.jpg

20220628-133519.jpg
 
Allrighty then!!! I removed the license plate lights housing and sound deadened behind it with the 80mil and added some Noico Re3d 150mil to the inside of the housing. I also took care of the license plate and mounting area then added some to the deck lid. I added some Noico Red to the insides of the holes under the lid but it's hard to flip over and take pics. The rest is what you see. Closing the trunk now sure sounds different.

20220628-125510.jpg

20220628-131735.jpg

20220628-132306.jpg

20220628-132654.jpg

20220628-133519.jpg
Nice
 
3 fingers on my left hand and 2 on my right. I used my knife yesterday but do not remember once cutting myself. Then, just a moment ago I remembered the foil on the sound deadening of the MAT66. YIKES!!!
I cut nearly to the bone once. learned that leather gloves are cheap 😬
 
They are dry enough apparently. They were aimed where I wanted them so no aiming necessary. They look uneven but they are at the same levels on each a-pillar, the same height.

20220629-134059.jpg
Look pretty dammned good to me. An uneven dash always looks awkward to me.Man, I bet it sounds pretty nice. I really like my CDT speakers. They seem to last thus far and have taken a beating, and still sound very nice. I hope you enjoy them
 
Look pretty dammned good to me. An uneven dash always looks awkward to me.Man, I bet it sounds pretty nice. I really like my CDT speakers. They seem to last thus far and have taken a beating, and still sound very nice. I hope you enjoy them
They are just mocked up at the moment. Next up is sound deadening in the doors and the mounting of the CDT 6.5's. When I do those I will run the speaker wires from both amps for all those 6 speakers. I am taking it slow.
 
They are just mocked up at the moment. Next up is sound deadening in the doors and the mounting of the CDT 6.5's. When I do those I will run the speaker wires from both amps for all those 6 speakers. I am taking it slow.
Gotcha. Rushing tends to create issues. Doesnt hurt to take the time. Right On
 
Activity
No one is currently typing a reply...

Similar threads

This would go a long way to alleviating the dimming issue, up to around 4000 watts. It can handle 100A continuous and up to 285A 7 second burst...
6
262
Fully test it without the ACR-1. TBH it sounds like an amplifier issue. Try connecting your phone direct to the amp via a 3.5mm to RCA cable. If...
2
561
I would make a call, or send like Crutchfield or Sonic Electronix an Email or even Chat with them and see if they can help you get the correct...
12
1K
I started a thread in the general car audio forum, but wanted to asked here as well. I'm thinking about replacing the stock front speakers in my...
0
980

About this thread

ThxOne

Premium Member
The Boss
Thread starter
ThxOne
Joined
Location
The United States of America
Start date
Participants
Who Replied
Replies
728
Views
85,669
Last reply date
Last reply from
audiobaun
Screenshot 2024-03-07 184329.png

Doxquzme

    Mar 27, 2024
  • 0
  • 0
IMG_3075.jpeg

Daniel Lee

    Mar 27, 2024
  • 0
  • 0

Latest topics

Top