Midrange or Midbass? Or, Both?

[SlugButter]

Why the Dayton sub though? If you get a Dayton midbass 6.5 it will perform in much smaller air space. You won’t have .5 cubes for that.

 

[SlugButter]

Home

Dayton Audio DSA175-8 6-1/2" Designer Series Aluminum Cone WooferThe Designer Series by Dayton Audio was developed specifically with the speaker designer in mind. It is an affordable, attractive line of drivers that puts performance first. Careful engineering ensures that each speaker in the...

www.parts-express.com

this one works in .1 cube sealed.

 

[Jeffdachef 5,000+ posts]

Is this better, or, the same? Any suggestions? I think it gets down to 36, on paper anyway. View attachment 18931

one, thats a subwoofer not a midbass, two, thats outta stock. Try faital pros, B&C or beyma if you want very loud decent sounding with a slight hint of SQ

 

[Bobbytwonames 5,000+ posts]

one, thats a subwoofer not a midbass, two, thats outta stock. Try faital pros, B&C or beyma if you want very loud decent sounding with a slight hint of SQ

Those Faital Pros don't look bad. So, my plan is run the Faital 6.5 in the door with the Pioneer tweets. Then run one pair of the Pioneer midrange in the rear deck as rear fill. I know most people don't like rear fill, but I do. Does that sound alright to you?

 

[bajbass]

I too once loved my rear fill untill i listened to a properly tuned and time aligned front stage and never looked back.....

 

[Bobbytwonames 5,000+ posts]

I too once loved my rear fill untill i listened to a properly tuned and time aligned front stage and never looked back.....

So, what about a set of rear midbass? Or, should the midrange, midbass, and tweeters all be in the front?

 

[Bobbytwonames 5,000+ posts]

Saturday night and this site is dead. Or, maybe I just don't have a life.

 

[Jeffdachef 5,000+ posts]

So, what about a set of rear midbass? Or, should the midrange, midbass, and tweeters all be in the front?

All front. Anything to the rear fks up the soundstage

 

[Bobbytwonames 5,000+ posts]

All front. Anything to the rear fks up the soundstage

So, I have a set of mids and tweets to sale. And, buy a pair of midbass. How will that system work with the Dayton DSP? I have a four channel amp and a mono amp. That DSP stuff is new and confusing to me. Thanks for your help man.

 

[Bobbytwonames 5,000+ posts]

All front. Anything to the rear fks up the soundstage

Would it be a good midbass?

 

[Jeffdachef 5,000+ posts]

So, I have a set of mids and tweets to sale. And, buy a pair of midbass. How will that system work with the Dayton DSP? I have a four channel amp and a mono amp. That DSP stuff is new and confusing to me. Thanks for your help man.

like i said before, to run a midrange, midbass and tweeter configuration you would need and extra 2 channel amp. total 6 channels of amplification for this to work. Everything gets their own channel because you can control each channel independently. It shouldn't be hard at all if you downloaded the app and just fiddled around for 10 mins.

 

[Bobbytwonames 5,000+ posts]

like i said before, to run a midrange, midbass and tweeter configuration you would need and extra 2 channel amp. total 6 channels of amplification for this to work. Everything gets their own channel because you can control each channel independently. It shouldn't be hard at all if you downloaded the app and just fiddled around for 10 mins.

O.k., I have an old Kenwood 7502. 2 channel x 250 watts. So, I just one set of the mids and tweets. So, I should order a midbass that can handle 250 watts rms?

 

[wew lad 5,000+ posts]

Jeff listed speakers for you to look at. I suggest you look at those. I offered up exodus anarchy and the other one is Silverflute.

 

[Bobbytwonames 5,000+ posts]

like i said before, to run a midrange, midbass and tweeter configuration you would need and extra 2 channel amp. total 6 channels of amplification for this to work. Everything gets their own channel because you can control each channel independently. It shouldn't be hard at all if you downloaded the app and just fiddled around for 10 mins.

Jeff, I sold the Kenwood amp and bought a Taramps DS250X2. Can I install the tweeter, midrange, and midbass all in the door? I thought I remember you saying that the midrange and midbass need to be separated.

 

[Jeffdachef 5,000+ posts]

Jeff, I sold the Kenwood amp and bought a Taramps DS250X2. Can I install the tweeter, midrange, and midbass all in the door? I thought I remember you saying that the midrange and midbass need to be separated.

You can just make a little sealed off pod for the mid