Amplifiers

Post amplifier, crossover and signal processor discussion topics here. Amplifiers provide the power to fuel the sound.
what about a Clarion APX1000.2? Anyone have news on that?
2
728
according to the directory i have that amp puts out 250x2 and i dont know about bridged mode
2
711
U
I have it at 150Hz
3
2K
Unregistered
U
U
Your amp should be able to handle 3 ohm load.. Just make sure you keep your gains low for a while to see how the amp will react if you aren't sure...
4
2K
U
Also to add to the post above mine, if you plan on running 2-ohms or lower, make sure your amp will be able to handle it. If I am correct, with...
3
603
U
The RF D class amps state they are only stable down to 2 ohms, but u can bring it down to 1. P.G amps are the same way I had a ZX600TI and ran...
7
748
If you want a good 1000Watt amp definately do not be fooled by the sonys. They love to over rate all of there equiptment. Stick with big names...
3
1K
Unregistered
U
U
that thread was started by me before i registered here, i ended up getting (2) MA audio HC2501 amps they are 1250w rms to one chan. both the...
4
3K
U
I recently bought a Audioline AL-2600 Amplifier second hand, it works fine, but i need a manual to see the technical specs (input sensivity and...
0
746
Unregistered
U
what kind of amp should i get for 3 12" cerwin vegas 12d4. they're 4 ohms dual voice coils
0
520
I think it will sound good, those spkrs are only rated at 350 w rms so if you wire them to get 300 watts a spkr you will be doing just fine, they...
3
805
Unregistered
U
U
after i am done ordering everything it should look like this HU: kenwood kdc9017 doors: kenwood 6 1/2 comp.'s sides: kenwood 6907 6x9's deck...
13
2K
U
Amp
both company makes superb products. both make good amps, subs, head units, speakers. anything either of those companies decide to put out, i'd...
1
582
The JBL is a great choice. Keep it.
2
623
The thing about Profile is that I have seen, with my own eyes, one catch on fire because it could not handle a 2 ohm load. Maybe all of them are...
7
634
C
Your right, Audiobahn is good stuff but MA Audio is not very good so now if your compairing Visionik to MA Audio then I guess it is crap too.
6
867
Im looking for a new amp.. that JL 1000/1 isnt coming out anytime soon so i cant wait for it. Any suggestions Im looking to spend up to $1000.00...
0
485
Let me guess you have 2 8 ohm rockfords if so you can run i parallel and go to 4 ohm then you have a much better variety of amp almost anything...
4
708
he said his amp is 1000 x 1 @ 4ohms not 1 ohm........... If your amp is really 1000 x 1 @ 4 ohms I would say you would get 1500 x 1 @ 2 ohms easy
2
580
Unregistered
U
imo I think the kenwood excelon and the pioneer premier are exelant amps, but if your going to power subs I would probably go with jbl 1200.1
1
577
Unregistered
U
U
SONY has a bad rep but i went out and tried their one d-class amps and love it.Sometimes thats what you have to do.See it 2 believe it is alot...
5
604
If you can afford it go out and buy some 4 gauge wire and 4 gauge ground it's not that much 20 feet will run u like 35$
3
701
dunno if you gonna get 1000 for the combo.. at CBRStereo.com you can get those subs for 269 a piece.. so about 550 bucks new..and on ebay you can...
1
563
U
i need 2/4 geniuses amps do you no were i can get them
0
512
Unregistered
U
I agree with Fu-Man-Chu about everything he says. However find out which year the Fosgate amp is. The newer ones are said to be geared more...
3
2K
U
For that amount of power class D would be most practical. The rf class D's won't work well in your case b/c that amp wants a 2 ohm total load...
4
761
U
I just bought 2 bazooka 12's model EL1204. The sound I am looking for is clarity, not just a lot of bass. Which amp would be good to push these...
0
664
Unregistered
U
Okay here goes: you have two dvc 4 ohm subs. Wiring one in parallel creates one 2 ohm sub, so basically you have two 2 ohm subs, you then wire...
1
591
U
I agree, check out the rf bd500.1 it would be a good amp also for those subs.
7
626
Unregistered
U
WHICH IS THE BETTER FOR MY SET UP? JBL BP1200 OR THE POWER BD1000??
2
665
u can power 10000000+ subs to one amp if u can fit all the wires into the terminals, regardless of how many channels it is. but its not as easy...
1
695
yes you can definatly run the two subs off the jbl amp, all of their job bp amps are 1 ohm stable and you can get them really cheap from ebay the...
9
3K
ma audio is high end mobile authority..
1
910
I just bought rockfords 150.1 mono amp with remote bass control, but my bass nob is gone, does anyone know where I can get A new bass nob and I...
0
793
i meant different, in that, my previous amps have all been wired using tiny phillips-head screws
5
647
PPI amps are one of the best and most erliable amps out on the market right now! That is a darn good choice for an amp and I highly recomend it.
2
810
hey i have some good advice for you team rockford guy, read over your post before you submit it, i found 18 errors in your post, good job dumbass
5
2K
Unregistered
U
By wiring the subs parallel you are creating a load that the amp see's as 2 ohm.
10
2K
U
Well.. Its worth that ofcorse... the pawn shop made some cheese.
1
621


Create account or login to post/reply

You must be a member in order to post a message.

Create account

Register below to post messages:

Log in

Already have an account? Log in below:

Amplifiers

Post amplifier, crossover and signal processor discussion topics here. Amplifiers provide the power to fuel the sound.

Messages
460,103
Views
70.1M

alpine amp amplifier amps help hifonics kicker rockford fosgate subwoofer sundown
DD451980-D607-41AB-B69C-6745AAE4B848.jpeg

SlugButter

    Mar 28, 2024
  • 0
  • 0
F98C6D78-7734-4659-9FCA-34969BDDC56A.jpeg

SlugButter

    Mar 28, 2024
  • 0
  • 0

Latest topics

Top recent contributers

Top