Recent content by shakenbass

L/O Mode is set to SUB. Subwoofer is set to ON. LPF is set to 120HZ. Subwoofer level set to highest possible, 8. HPF off, subwoofer shakes car. HPF on, subwoofer stops making sounds. Should I contact JVC?

Very late reply, sorry bout this! Anyhow, I removed my head unit and checked the RCA connection. My RCA cable is undoubtedly running from my rear/subwoofer output to my amplifier. I put the head unit in SUB mode, subwoofer is ON, etc. However, switching the high pass filter on is still...

This question may or may not be stupid, however I'm having trouble finding info online. Does a typical car stereo deck output the same signal to the rear speakers as it does to the fronts? I'm considering getting rid of the rear speakers in my Accord altogether, and instead considering placing...

My rears are actually $160 JBL's :P They can take 100w RMS and 300w max. My head unit has its volume settings from 1-50, and Ive tested pretty thoroughly that anything over 20-25 gets a decent amount of distortion, which leads me to the conclusion that my HU sets the volume number by watts. The...

There are two RCA jacks, one is for front speakers and the other is rear/sw, you can only do one or the other from it. My HU L/O mode is indeed set to subwoofer, and subwoofer is set to ON. In fact, the HU takes away the HPF option if subwoofer is set to OFF. So Im absolutely lost :/

Hi all, I recently installed a JVC KD-X50BT HU in my car as well as a little Dual 8" Subwoofer enclosure, and a pretty boomy pair of 6x9's in the rear as well. While the 6x9's can do 100w RMS, I want to keep the bass signals away from them currently as they are only being powered by the head...