I have a 2001 Tahoe with one run of zero already, but I don't think another run of zero will fit through the hole. Do I need to make the hole bigger or drill a new hole?
CarAudio.com Elite
2 runs of zero?
I have a 2001 Tahoe with one run of zero already, but I don't think another run of zero will fit through the hole. Do I need to make the hole bigger or drill a new hole?
Junior Member
Just drill a new hole. Right next to the one you already have.
Time is Money
I have to drill holes in my firewall to make my wire fit -.- ... so do it up, drill away!Originally Posted by Bass911
Car: 2011 Ford Taurus SEL / Alt: DC Power 270XP
Deck: Pioneer AVIC-Z140BH / Amps: (1) DC 5.0K, (1) RF T400-2
Speaks: (1) RF T2652-S 6.5", (1) RF T1682 6x8"
Subs: (2) DC XLm2 15's / Batts: (2) XS XP3000 Batts
Wiring: Kolossus Fleks Kable 1/0 (2 runs)
My Ratings:
iTrader: http://www.caraudio.com/forums/itrader.php?u=1011469
Feedback Thread: http://www.caraudio.com/forums/buyer-seller-feedback/575818-mrclean636-feedback-thread.html
martiandancer31 disliked this post
CarAudio.com Elite
What about in the back. I need to relocate my ground, but don't want to hit the gas tank?
always low
Find a spot where it's clear on both sides to drill in the firewall. I use step bits with an impact driver. Just silicone them or seal them off and use grommets, don't let the wire jacket sit on that raw metal.
Alpine - ASE (local) - Batcap - CT Sounds - eD - Excessive Amperage - Powerware - Rainbow
Posting Permissions
|
Bookmarks