Re: Subs Very Quite. What am I doing wrong.
You can still run the 4-channel amp bridged as 2-channels. Wire up the subs in this method:
Left channel (+) >> sub #1 (+) .... (+)
(-) >> sub #1 (-) .... (-)
Right channel (+) >> sub #2 (+) .... (+)
(-) >> sub #2 (-) .... (-)
You will running the amp @ 1.5 ohms per channel.
Factory RCD-510 H/U
* Pioneer TS-D1720C (front doors)
* MASSIVE AUDIO CK 6X (rear doors)
* MTX Thunder 275x
* Alpine 3547
* AudioControl 2XS
* CT Sounds STRATO V.2 10" sub (1.2cu ft ported box, tuned @ 35Hz)