bridging my system

[dcpvnlb1]

I have 2 12" rockford P3S 4 ohm subs and a hifonics zues 800watt rms max amp. Is it possible to bridge both of my subs to this amp without messing anything up and if so what would be the best way to do so. Thanks.

[frogcase2002]

Which amp is it?

[jnewnam88]

If its 1 ohm stable, wire them both in parallel to get 1 ohm. You really need to get a bigger amp those p3's are going to be way underpowered! You should be running at least 800 a piece!

[audiobaun]

I have 2 12" rockford P3S 4 ohm subs and a hifonics zues 800watt rms max amp. Is it possible to bridge both of my subs to this amp without messing anything up and if so what would be the best way to do so. Thanks.

DVC 4ohm subs?Or SVC 4ohm subs?

[audiobaun]

Which Zues amp?There are several series of Zues

[Tenacious]

P3 Slim models are rated 400 RMS each and are DVC so you'll be powering it just right if you wire it all in parallel.

[frogcase2002]

P3 Slim models are rated 400 RMS each and are DVC so you'll be powering it just right if you wire it all in parallel.

If his amp is one ohm stable yea but .... its probably not

[Tenacious]

If his amp is one ohm stable yea but .... its probably not

very true... best bet is to tell him to trash the Zeus amp and get a monoblock