Closed Thread
Results 1 to 2 of 2

Reload Thread: wiring sub, very basic question

  1. #1
    anthonyfg's Avatar
    anthonyfg is offline Junior Member



    Join Date
    Apr 2002
    Location
    san jose, ca
    Posts
    8
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Icon32 wiring sub, very basic question

    im very new at car audio but im tryin, i have an 11 by 12 by 12 by 12, basically a cube with one inch taken off a side. this guy told me that you just stick the wire in the hole on the connector on the sub and tighten the bolt but what about connecting the wires from the sub to the box tabs, the tabs are like little strips of metal with a tine hole on the end, should i solder them, i am using 8awg wire







  2. #2
    gator4thehaters's Avatar
    gator4thehaters is offline Senior VIP Member



    Join Date
    Mar 2002
    Location
    Indianapolis, In
    Age
    41
    Posts
    323
    Post Thanks / Like
    Mentioned
    0 Post(s)
    You CAN solder it, but its not neccessary if the connectors hold the wires on. I wouldn't solder them because if you want to replace the speaker(s) you have to melt the solder as opposed to just taking the connector off and plugging the new speaker up.



    Live life 2 the full cuz u only live once!

Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum