Aq supertweet mounting?

[NASTY08IMPALA]

Ok these things are huge..too big for my pillars i believe ..depth wise..anybody have experience installing these? What works and what doesnt? Any advice will be appreciated. Thanks guys

[mlstrass]

I have mine mounted in the A pillars and in the wife's van they're in the dash.

They're only 1 1/2" deep, so not that hard to mount actually. Single one in the A pillar isn't that bad, but you need to go around 3 3/4" wide.

[NASTY08IMPALA]

i have mine mounted in the a pillars and in the wife's van they're in the dash.

They're only 1 1/2" deep, so not that hard to mount actually. Single one in the a pillar isn't that bad, but you need to go around 3 3/4" wide.

i have yet to pull off the pillars to see how much room i have guess ill try that first..yea just doin 1 in each pillar

[mlstrass]

i have yet to pull off the pillars to see how much room i have guess ill try that first..yea just doin 1 in each pillar

You just have to build out some off the A pillar. Make a baffle ring and hot glue it in place with spacers, wrap it, FG, sand it smooth, cover...done

[04murdalanche]

You just have to build out some off the A pillar. Make a baffle ring and hot glue it in place with spacers, wrap it, FG, sand it smooth, cover...done

This.

Personally I'd put the ******* in the doors

[mlstrass]

This.

Personally I'd put the ******* in the doors

They work fine there also, have pretty wide dispersion. Just need to make sure a leg isn't totally blocking them...

[NASTY08IMPALA]

I was thinking about doin near 6.5 waist level maybe keep down on the harshness

[04murdalanche]

I was thinking about doin near 6.5 waist level maybe keep down on the harshness

They are so fucking loud

[mlstrass]

I was thinking about doin near 6.5 waist level maybe keep down on the harshness

Too much power makes them harsh, otherwise it's not a problem. I have them reflecting off front windshield and they sound very good, not harsh at all. Probably getting about 20watts each if that...

[04murdalanche]

Too much power makes them harsh, otherwise it's not a problem. I have them reflecting off front windshield and they sound very good, not harsh at all. Probably getting about 20watts each if that...

Really? I thought you wouldn't even be able to hear me with only 20 watts going to me lol I thought they had to have lots o power

[mlstrass]

Really? I thought you wouldn't even be able to hear me with only 20 watts going to me lol I thought they had to have lots o power

108dB sensitivity = very loud off little power

[04murdalanche]

108dB sensitivity = very loud off little power

Oh **** I didn't realize their sensitivity was that high, holy hell lol

[mlstrass]

Oh **** I didn't realize their sensitivity was that high, holy hell lol

Lot of guys run them off HU power, but I prefer to amp them....

[04murdalanche]

Lot of guys run them off HU power, but I prefer to amp them....

But if you have ~20 watts going to them why not just use HU power? Just curious

[NASTY08IMPALA]

Yea i will be running.them on front 2 channels of ppi bk800.4 and 4 6.5 aq on the rear channels bridged