Printable View
hey everyone, long time lurker first time poster. i recently bought a jvc kw-ab70bt HU, Pac radiopro 4 harness, and a parking brake bypass from ebay. the instructions for the PAC and the bypass are saying connect the blue/white a blue respectively to the rem. wire on the jvc harness.i believe this is canbus related so the evic ('12 dodge challenger) can display radio on/off. if I do this, is my only option then to run remote from a fuse in the trunk? thanks in advance.
No...you can run a second wire from the radio's remote to an amp.
thanks for the reply canaan, is there a clean/safe way to do this? my rem out is only rated for 200mA and im not sure what the factory display side would be pulling + 2 amps. I bought a relay to run the 2 amps before i realized the interface harness needed my rem off the HU
Then use the relay off the remote and run the relay output to the amp an interface.
this is why im a noob- I would have never thought of that. thank you maylarQuote:
Originally Posted by maylar