I have a DC audio 1.2 k, and 2 DVC 4 ohm subs, now the amp has 2 sets of speaker inputs 2 pos, 2 neg, do I still have to wire them together the traditional way or can I wire them separate? And do the 2 sets of inputs bridge internally? Thanks
Junior Member
I have a DC audio 1.2 k, and 2 DVC 4 ohm subs, now the amp has 2 sets of speaker inputs 2 pos, 2 neg, do I still have to wire them together the traditional way or can I wire them separate? And do the 2 sets of inputs bridge internally? Thanks
I do what I want
Uhhhh .1 or 1?
Western Rep.
99 Honda CRV: (Always Changing) ___________ 79 F-150: Show Truck ________________
-Head Unit: Eclipse CD7100________________ -Head Unit: Eclipse CD7100
-Sub Stage: Sundown SD-2 8's sealed________ -Sub Stage: Looking
-Mids/Highs: Deciding_____________________ -Mids/Highs: Scan Speak & Blaupunkt
-Sub Amp: MMATS Hifi 6 channel____________ -Sub Amp: American Warrior Set (Zed Built)
-Mid Amp: ^^^ 5/6 bridged at 1 ohm_________ -Mid Amp: ^^^
that **** i dont like
.1 would fry that amp bro
Things to look forward to:
(2) 10" or 12" imperium audio designs subs
set of PHD MF 6.5" comps
Completely seal off and deaden my doors
aquire a 2k amp
aquire a 2 channel amp for front stage
West liked this post
Junior Member
Sorry typo just 1 ohm
CarAudio.com Elite
Wire all positives together and all negtives together. Called Parallel wiring
'11 Jeep Patriot
Head Unit - Pioneer AVH-P3200DVD
Front - Infinity Kappa's
Front Amp - Soundstream 200.2
Subs - 2 Obsidian 15's in 5.5 cubes @ 28Hz
Sub Amp - Skar 1500
Stock Electrical
142.8 @ 41Hz
CarAudio.com Elite
http://a248.e.akamai.net/pix.crutchf...no-low-imp.jpg
Like that ^
OH. I see what you're asking. Yes, the outputs are internally bridged. So each sub could have it's own positive and negative terminal if you wish to do it that way.
'11 Jeep Patriot
Head Unit - Pioneer AVH-P3200DVD
Front - Infinity Kappa's
Front Amp - Soundstream 200.2
Subs - 2 Obsidian 15's in 5.5 cubes @ 28Hz
Sub Amp - Skar 1500
Stock Electrical
142.8 @ 41Hz
Junior Member
Ok makes sense, do my end wires pos&neg have to come off each sub or can I run the final wires off of one sub?
Junior Member
Ok db-spl but how would I go about that? Cuz they have to be wired together?
CarAudio.com Elite
They do get wired together. Through the amp. Those output leads are bridged inside the amp..
'11 Jeep Patriot
Head Unit - Pioneer AVH-P3200DVD
Front - Infinity Kappa's
Front Amp - Soundstream 200.2
Subs - 2 Obsidian 15's in 5.5 cubes @ 28Hz
Sub Amp - Skar 1500
Stock Electrical
142.8 @ 41Hz
Junior Member
So would I still have to wire the subs together or could I go separate with each sub having a jumper then + & - off of each sub?
CarAudio.com Elite
You can do either. they both bring you to the same final impedance.
'11 Jeep Patriot
Head Unit - Pioneer AVH-P3200DVD
Front - Infinity Kappa's
Front Amp - Soundstream 200.2
Subs - 2 Obsidian 15's in 5.5 cubes @ 28Hz
Sub Amp - Skar 1500
Stock Electrical
142.8 @ 41Hz
Junior Member
Ok so that diagram u showed I wouldn't have to wire them together at all? Just a +&- jumper on each sub then the other +&- to the amp? Repeat for each sub?
CarAudio.com Elite
If you wanna use all the terminals, it gets wired like so:
'11 Jeep Patriot
Head Unit - Pioneer AVH-P3200DVD
Front - Infinity Kappa's
Front Amp - Soundstream 200.2
Subs - 2 Obsidian 15's in 5.5 cubes @ 28Hz
Sub Amp - Skar 1500
Stock Electrical
142.8 @ 41Hz
Junior Member
Ok exactly what I was looking for, so I dont have to use any jumper wires on each coil?
Premium Member
Subwoofer Wiring Diagrams, One 4 ohm Dual Voice Coil (DVC) SpeakerOriginally Posted by Tyler24
Wire ea sub to a 2ohm load back to on set of +,and - terminals,and the amplifier bridges internally for dropping to the 1ohm load on the subs impedience.This amplifier and others like it with dual connections are made to eliminate that extra Jumper exposed wire from sub to sub
Posting Permissions
 |
Bookmarks