Newbie needs help with Sony xnv660BT, trying to test operate on bench
This has to be the simplest forum question ever.
Trying to test run this Sony unit on a bench before installing, to make sure it works!
I've grounded the black lead, I then joined the yellow and red together and applied 12v to those two.
(Sony shows yellow hot all the time and red is a switched 12v)
Unfortunately I can't get it to power on.
I've tried the reset, with no effect.
Curious if possibly the orange with white tracer, "illumination" wire needs 12v, maybe?
The only on/off button I see on the 660 is hitting the 'source' button.