Closed Thread
Results 1 to 6 of 6

Reload Thread: Here's a simple wiring one for you guys! Please help :)

  1. #1
    solrac's Avatar
    solrac is offline Junior Member



    Join Date
    Oct 2012
    Location
    United Kingdom
    Posts
    8
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Here's a simple wiring one for you guys! Please help :)

    Would really appreciate your help am sure this is something very simple!

    Just about to fit a JVC double din (JVC KW-DB60AT) into my Qashqai. Have the right stalk adapter and aerial adapter and also an optional JVC bluetooth kit.

    I need to connect the bluetooth kit to the blue/white remote wire from the HU for power, but I also have the aerial adapter which seems to need to connect to that wire too.

    Am I right in thinking I could connect the aerial adaptor to a spare red acc wire coming out of the HU instead?

    Thanks so much for your help! Have been scouring the internet for days but can't find the answer.


    CTSNS001 Stalk Adapter for Nissan
    CTJVCLEAD2 - Connects2 JVC Stalk Adaptor
    CT27AA75 Aerial/Antenna Nissan DIN Adaptor
    JVC KS-BTA100 Bluetooth







  2. #2
    West's Avatar
    West is offline Banned



    Join Date
    Jan 2012
    Location
    Oliver Springs, TN
    Posts
    3,703
    Post Thanks / Like
    Mentioned
    73 Post(s)

    Re: Here's a simple wiring one for you guys! Please help :)

    Red acc wire needs to go to the cars ignition switch on the wireharness.
    Connect all the blue/white wires together with a butt-connector (bluetooth, aerial, and blue/white wire from HU.)
    - Blue/white wire from hu sends a signal to turn on amps, antenna's etc.
    Last edited by West; 10-12-2012 at 05:46 AM. Reason: -




  3. #3
    solrac's Avatar
    solrac is offline Junior Member

    Threadstarter


    Join Date
    Oct 2012
    Location
    United Kingdom
    Posts
    8
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Here's a simple wiring one for you guys! Please help :)

    Thanks for the reply West. There is already one red wire going into the wiring harness, this one seems to be spare, doesn't connect to anything else.

    I actually did the crimping last night in prep for fitting tomorrow and connected it to the spare red accessory cable. Do you think I should decrimp and then reconnect the 3 together like you suggest? Or should it work how i have it anyway? Cheers!




  4. #4
    West's Avatar
    West is offline Banned



    Join Date
    Jan 2012
    Location
    Oliver Springs, TN
    Posts
    3,703
    Post Thanks / Like
    Mentioned
    73 Post(s)

    Re: Here's a simple wiring one for you guys! Please help :)

    Quote Originally Posted by solrac View Post
    Thanks for the reply West. There is already one red wire going into the wiring harness, this one seems to be spare, doesn't connect to anything else.

    I actually did the crimping last night in prep for fitting tomorrow and connected it to the spare red accessory cable. Do you think I should decrimp and then reconnect the 3 together like you suggest? Or should it work how i have it anyway? Cheers!
    Does your car have an externally amplified speaker system? Because if it does it may be tricky and you will need a special wireharness.

    If your car does not have an externally amplified speaker system...

    Some stock wireharness's have two sets of ignition switches. You need to connect the decks ignition turn on to the ignition turn on in the wireharness it's OK if one of the red wires is unused.

    Your power antenna wire should be on the wire harness. And the bluetooth turn on wire should also be connected to the blue/white wire from the HU. It may look a little funny but all three of the turn on leads should be connected at a "T" with a butt connection.
    - Sometimes head units have separate blue (antenna turn on wires) and blue/whit (amplifier/accessory) turn on wires, in which case you can use the blue for
    the wire harness and the blue/white for the bluetooth.

    There are bound to be a few extra wires left on the wireharness, as long as you have the necessary wires connected to the right place you will be fine.

    Hope this helps.

    When in doubt you can always call JVC support as a last resort!




  5. #5
    solrac's Avatar
    solrac is offline Junior Member

    Threadstarter


    Join Date
    Oct 2012
    Location
    United Kingdom
    Posts
    8
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Here's a simple wiring one for you guys! Please help :)

    That's a huge help, thank you.

    I'll decrimp what I've done and connect both the Bluetooth and the Antenna to the same blue/white remote lead from the HU. Presume I can just use a normal butt connector with two cables in one end and one in the other?




  6. #6
    solrac's Avatar
    solrac is offline Junior Member

    Threadstarter


    Join Date
    Oct 2012
    Location
    United Kingdom
    Posts
    8
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Here's a simple wiring one for you guys! Please help :)

    One more question on the ground cables - the car's harness doesn't have a ground cable so the HU harness adaptor has a ground cable with a ring connector. Am I fine to wrap the ground cable from the bluetooth unit and this ring connector around one of the mounting screws for the cage and get a ground that way?




Closed Thread

Similar Threads

  1. BIG Power wire question for you guys!
    By Goindef154 in forum Wiring, Electrical and Installation Help
    Replies: 45
    Last Post: 06-15-2009, 06:30 PM
  2. Replies: 27
    Last Post: 02-26-2007, 12:26 AM
  3. I have a sub/amp question for you all. Please help!
    By ybnormal70 in forum Subwoofers
    Replies: 6
    Last Post: 02-02-2006, 11:13 PM
  4. Here's a hard one for you guys!!!
    By Stealth in forum Subwoofers
    Replies: 22
    Last Post: 09-01-2003, 10:36 PM

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum