Need help asap

[BNolan12]

I'm trying to complete my big 3 right now but my bat (-) to engine block is almost impossible to get to. Is there any alternate places to ground too??

[BNolan12]

Any help, please??

[TaylorFade]

You can't find a single bolt attached anywhere on the motor to utilize?

[BNolan12]

You can't find a single bolt attached anywhere on the motor to utilize?

That's what I'm asking. I wasn't sure if I could use any bolt on the engine block or if it had to be the one that's already connected.

[sacsking916]

You don't wanna use just any bolt. Find the bolt on the alternator bracket an use that.

[BNolan12]

You don't wanna use just any bolt. Find the bolt on the alternator bracket an use that.

I can use a bolt on the alt as an engine block ground?

[Canaan]

Yes a bolt that mounts the alt to the motor.

[sacsking916]

I can use a bolt on the alt as an engine block ground?

Yes. Best ground is the source of power.

[BNolan12]

Yes a bolt that mounts the alt to the motor.

So let me make sure I have this right, bat (+) to alt (+), bat (-) to chassis and then bat (-) to bolt on the alt?

[sacsking916]

So let me make sure I have this right, bat (+) to alt (+), bat (-) to chassis and then bat (-) to bolt on the alt?

Yes

[BNolan12]

Yes

Thanks for all the help man. Where's the best chassis ground at??

[sacsking916]

Thanks for all the help man. Where's the best chassis ground at??

At the frame

[BNolan12]

At the frame

Ok because the current ground is just a bolt through the body of the truck. I will look for a bolt on the frame to use. Thanks again for the help really appreciate it.

[maylar]

Actually, the body is better than the frame. The factory typically grounds the battery to the fender. That's one of the big 3.