I need of help
I **** at explaining things so hang in there.
Im putting together my list for nex spring-summer upgrade.
Im adding a ZX2500 to make 2 total. I looked into going with 1 MOJO 4K or a SAZ-4500 but this is my far cheapest option. The problem is the amp is not stappable but I can link the RCAs so that means two bass remotes. Is there a device like some audiocontrol unit that I can run infront of the amps to eliminate this issue, and just run the bass remote the unit has? Ive been on Amazon looking but nothing has came up.
Also will my electrical hold up? It does OK with 1 2500 but I still have moments of drop, mostly at idle but some tracks still pull it down at speed. It dont stay down but it drops. I think my chassis ground isnt cutting it. I will be adding a ground from the front soon. ( Scion tC )
EA 200 amp, 1 Group 34 YT front 3 Group 51 YTs in the hatch. there will be four full runs of 1/0 OFC(2 and 2) when the time comes. Both amps will see a 2ohm load and they are pretty efficent.
I really want to do this right so please, any input is welcome.
As for sub choices. Ive narrowed it down to. BLTs N2s, Zcons, RD Alphas, HCCAs, RE MTs. Or just go with what I know, DC XLs. Box is 4.5 cubes tuned at 32 with areos(2 12s).
Cliffs... Just read it
2014 Ford Fusion SE 2.0T