Closed Thread
Results 1 to 9 of 9

Reload Thread: Double din install help

  1. #1
    Cbach1987's Avatar
    Cbach1987 is offline Junior Member



    Join Date
    Apr 2010
    Location
    Milwaukee Wisconsin
    Posts
    11
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Icon33 Double din install help

    I installed a pioneer AVIC-x390bt in an 07 civic ex and it all went ok and sounded great. But this morning the front driver side speaker wont work!

    Any ideas or help would b awesome







  2. #2
    Louisiana_CRX's Avatar
    Louisiana_CRX is offline dem shoes......



    Join Date
    Aug 2006
    Location
    Piney Hills of Louisiana
    Posts
    34,160
    Post Thanks / Like
    Images
    9
    Mentioned
    31 Post(s)

    Re: Double din install help

    most likely a bad connection the factory speakers can take the power of the deck with their neo motor structure...id double check the white and white w/black stripe wire connection behind the deck




    Current 2010 Louisiana USACi State Records :

    Trunk 0-1000.................. 151.3
    StreetBeat 2................... 145.6
    Stock 1801-up.................153.8
    SuperStock 1801-up..........154.2
    Top three in 11 out of 26 power classes and Louisiana USACi Points Leader at 465

  3. #3
    Cbach1987's Avatar
    Cbach1987 is offline Junior Member

    Threadstarter


    Join Date
    Apr 2010
    Location
    Milwaukee Wisconsin
    Posts
    11
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Double din install help

    Awesome ill give that a shot after work and see if that fixs it. Thank you!




  4. #4
    Louisiana_CRX's Avatar
    Louisiana_CRX is offline dem shoes......



    Join Date
    Aug 2006
    Location
    Piney Hills of Louisiana
    Posts
    34,160
    Post Thanks / Like
    Images
    9
    Mentioned
    31 Post(s)

    Re: Double din install help

    Quote Originally Posted by Cbach1987 View Post
    Awesome ill give that a shot after work and see if that fixs it. Thank you!
    yw....let me know




    Current 2010 Louisiana USACi State Records :

    Trunk 0-1000.................. 151.3
    StreetBeat 2................... 145.6
    Stock 1801-up.................153.8
    SuperStock 1801-up..........154.2
    Top three in 11 out of 26 power classes and Louisiana USACi Points Leader at 465

  5. #5
    maylar's Avatar
    maylar is offline Electrical Weenie



    Join Date
    Jan 2002
    Location
    Connecticut
    Age
    62
    Posts
    3,437
    Post Thanks / Like
    Mentioned
    13 Post(s)

    Re: Double din install help

    Could also be the speaker connections inside the door.



    dave
    ----------
    1999 Buick Park Ave Ultra
    Head Unit: JVC KWHDR720
    EQ: Audiocontrol EQL
    Front Stage: Hybrid Audio Technologies Imagine 5.25 mids, Morel Maximo tweets
    Sub Stage: Boston G3 10", 0.5 cu ft sealed
    Amp: PPI Phantom 900.4
    Rear Fill: Boston SE953 6X9's

  6. #6
    Cbach1987's Avatar
    Cbach1987 is offline Junior Member

    Threadstarter


    Join Date
    Apr 2010
    Location
    Milwaukee Wisconsin
    Posts
    11
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Double din install help

    I tried those wires and checked the rest while I was back there and couldnt see any loose wires. I tried pulling on them to make sure they were all attached and everything checks out. I dont think its the speaker itself cuz I didnt touch them at all. Anyother ideas? It worked after it was first installed and then the next day it stopped working and only 3 work now




  7. #7
    Louisiana_CRX's Avatar
    Louisiana_CRX is offline dem shoes......



    Join Date
    Aug 2006
    Location
    Piney Hills of Louisiana
    Posts
    34,160
    Post Thanks / Like
    Images
    9
    Mentioned
    31 Post(s)

    Re: Double din install help

    Quote Originally Posted by Cbach1987 View Post
    I tried those wires and checked the rest while I was back there and couldnt see any loose wires. I tried pulling on them to make sure they were all attached and everything checks out. I dont think its the speaker itself cuz I didnt touch them at all. Anyother ideas? It worked after it was first installed and then the next day it stopped working and only 3 work now
    another test you can perform to test the speaker is to disconnect the two whit speaker wires and take a AA or AAA battery...found in most TV remote controls......then on the 2 white wires going to your door speaker not the radio touch one to each end of the battery...it doesn't matter which end...listen to see if the door speaker makes a scratchy sound...if so the speaker and wire are good...the tweeter at the corner of the dash won't make hardly any noise at all due to an inline capacitor 6db crossover that will filter the sound generated by the battery




    Current 2010 Louisiana USACi State Records :

    Trunk 0-1000.................. 151.3
    StreetBeat 2................... 145.6
    Stock 1801-up.................153.8
    SuperStock 1801-up..........154.2
    Top three in 11 out of 26 power classes and Louisiana USACi Points Leader at 465

  8. #8
    Cbach1987's Avatar
    Cbach1987 is offline Junior Member

    Threadstarter


    Join Date
    Apr 2010
    Location
    Milwaukee Wisconsin
    Posts
    11
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Double din install help

    I have the end crimped and on male and female ends and I dont think the actaul connections would b able to touch the battery.




  9. #9
    Cbach1987's Avatar
    Cbach1987 is offline Junior Member

    Threadstarter


    Join Date
    Apr 2010
    Location
    Milwaukee Wisconsin
    Posts
    11
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: Double din install help

    Bump for any help




Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts
1e2 Forum