So i know running 1 10 w7 your going to get 3 ohm's.. 2 w7's you get 1.5 ohm?..
Now my question is what about running 3 w7's? BTW the amp is 1 ohm stable.
So i know running 1 10 w7 your going to get 3 ohm's.. 2 w7's you get 1.5 ohm?..
Now my question is what about running 3 w7's? BTW the amp is 1 ohm stable.
Pioneer avhx5500bhs
Alpine Type S (factory replacements)
JL 1000/1v2
Alpine 1st gen svc 10" Type r's
3 3 ohm loads in parallel is 1 ohm. Take the reciprocal of each impedence add them up and the reciproecal of that is your answer.
3 ohm load is 3/1 So you take 1/3 + 1/3 = 2/3 flip that and you get 3/2 ( or 1.5 for 2 of them) for 3 of them you do 1/3 + 1/3 + 1/3 = 3/3 = 1
Q.E.D.
you could series wire the coils on each of the subs to 3 ohm. And then you could parallel wire in the 2 subs which would give you a final result of 1.5 ohm.
if you parallel wired everything then you would get .25 ohm
Head Unit: Pioneer DEH-80PRS
Front Stage: Massive CK6X
Rear Deck: Pioneer Coaxials
Speaker Amp: Kicker KX800.4
Sub: 12" Alpine Type X
Sub Amp: Alpine m-1000
__________________________________________________ __________________________________________________ ____________________________________________
Ref's:memphissoul4u, scottiej(x3), bassaddictj, jeepinTN(x2), Blados,lincolnls(slc720052), ssbogger, stuckinok(x2), matrxx dude, BoostedPontiac, fintheman, dbornotdb, mr. tibbs, lakota, iceteebone, WantedIsHere(HypnoticCure), Cahm Rohn, Bring97, Brian Owens, snoopysnooper, sdsport92064, annarbor84, tv559, RetroAudioinc, FJF, 01 S 10, oddiofile, stupify
Daym. My SAZ would be making some serious power
Pioneer avhx5500bhs
Alpine Type S (factory replacements)
JL 1000/1v2
Alpine 1st gen svc 10" Type r's
What are my options for wiring if i just ran say 1 13'' W7? 1.5 or could i wire to .75?
Pioneer avhx5500bhs
Alpine Type S (factory replacements)
JL 1000/1v2
Alpine 1st gen svc 10" Type r's
So i could wire 3 w7 8's to 1 ohm? since they are single 3 ohm..?
Pioneer avhx5500bhs
Alpine Type S (factory replacements)
JL 1000/1v2
Alpine 1st gen svc 10" Type r's
Black 2008.5 Mazda 3s Touring 5 Speed Hatchback
Tinted tails/turn indicators, blacked out emblems, partially debadged, 20% tint all around, LED footwells/interior lights
DECK: Kenwood DDX-512 double DIN touchscreen with backup camera
FRONT STAGE: CDT CL-51 Component Set
FRONT STAGE AMP: MA Audio HK-398
SUB: 2 12 inch Lightning Audio Storm X1s in 4 cubes tuned to 32hz
SUB AMP: MTX 81000d at 0.8 ohms
WIRING: All Knukoncepts Kolossus/KCA wire, Big 3 in Knu KLMX 1/0
Bookmarks