Closed Thread
Results 1 to 3 of 3

Reload Thread: first system big installation help

  1. #1
    rockafilla156's Avatar
    rockafilla156 is offline Junior Member



    Join Date
    Jan 2010
    Location
    Lanark
    Posts
    1
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Icon32 first system big installation help

    ok so this is my first system of this size. i have a pyramid royal blue 4 channel 4000 watt amp, pyramid royal blue 5.0 farad capacitor and 4 12 inch 1200 watt pyle subs.i also have 2 500 watt 6.5 inch speakers and a 1200 watt sony amp for the speakers in the front doors. i have to build the sub box my self and was thinking of going with sealed box. the plan is to put to 12 inch subs favign the rear of the car and 2 facing the front. with my 2 amps and capacitor bolted to the top. the 4000 will run the subs and then have the 1200 watt amp powering the 2 speakers in the doors. should i build the box for the 4 12 inch subs just big enough to fit the four of them or quite a bit larger? also should the subs have there individual compartments inside the box or should the box be wide open inside? and what is the best way to seal my trunk so the spoiler doesnt rattle? any questions comments or technical advice would be greatly appreciated. thanks







  2. #2
    Enellz's Avatar
    Enellz is offline The Triple O.G.



    Join Date
    Feb 2008
    Location
    Louisville, KY
    Posts
    2,363
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: first system big installation help

    Whoa....there are alot of things wrong with this:

    1) ditch the cap their crap. Invest in a sealed battery
    2) what's the specs on your subs and amp (Go rms rating only. max watts are a sales gimmick)
    3) what's the recommended enclosure size for yours sub
    4) DO NOT put your amp on your box

    also personally I would ditch the Pyle stuff and pyramid stuff.



    2003 CHEVY TRAILBLAZER
    AKA The Batmobile

    Pioneer 6000UB
    Sundown SAZ-3000D
    (2) Audio Q HDC3's
    Kinetik 2400
    40' of 1/0 Gauge
    A 38 HZ Box
    KICK ***!

  3. #3
    daboyfrumdabx's Avatar
    daboyfrumdabx is offline CarAudio.com Elite



    Join Date
    Dec 2009
    Location
    Pleasant Mt., PA
    Age
    24
    Posts
    1,199
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: first system big installation help

    Quote Originally Posted by Enellz View Post
    Whoa....there are alot of things wrong with this:

    1) ditch the cap their crap. Invest in a sealed battery
    2) what's the specs on your subs and amp (Go rms rating only. max watts are a sales gimmick)
    3) what's the recommended enclosure size for yours sub
    4) DO NOT put your amp on your box

    also personally I would ditch the Pyle stuff and pyramid stuff.
    This. And you should honestly ditch the entire idea of this install until you do some reading here and on a few other audio sites for the next few weeks. Hope everything is still returnable for your sake.



    *Sundown Z15 *SAX-1200D *CDT HD-61A *SAX-100.4 *Pioneer DEH-80PRS *KnuKonceptz *XS Power D3400 *270A Mechman

    Sold to: blackbonnie, TheOneJordan, resko1, kr15, Zichardruniga, IBmikexxx, plugitin
    Bought from: Gruszka530, theMessenjah44, ltr450racer690, Dpc69ss, 97maxima(Here and ROE), Pillow(CACO), pro-rabbit, woofercooker, Twisted_0912

Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may post attachments
  • You may edit your posts

1e2 Forum