Hey Guys, I'm installing a Kenwood CCD-2000 rear view camera in my SUV and found something strange. The reverse led, which should turn on the camera when the transmission is switched into reverse, works when disconnected from power. I followed the instructions and tracked down the back-up lights led...so, when the shifter is placed into reverse, the led has power. Then I tested the camera and found it was OFF! However, when I disconnected the reverse led, the camera turns on. Isn't this backwards? Can you think of any led in a 1999 Toyota Landcruiser that would have power when the ACC is on, but dead when shifted into reverse? Thanks!