Alpine DVC Subs Instal Question

[SticBandt2004]

Does anyone have Two Alpine Type Rs and Two Alpine MRD-M605 600w amps...the question is how do I install the Subs into the box and at what combination? I want to set the Subs for 2ohm...Please help

[Ingleside]

you cant just set them up as 2 ohm.
im pretty sure in your case you'll be running one amp to each sub.
what model alpine subs do you have?
if you have dual 4 ohm subs then they'll show the amps a two ohm load
if you have dual 2 ohm subs then they'll show the amps a four ohm load
think of is as you have two separate systems, each sub and amp being it's own system.

[SticBandt2004]

They are Dual 4ohm Type Rs

[Ingleside]

they you're set.
wire each sub to an amp like this
one sub to one amp

[SticBandt2004]

Do I split the Wire to go to both negs and pos terminals?....they are banana plugs also...in which the box isnt

[amartin_72]

make sure the jumpers on the subs are connecting both red terminals together and both black terminals together. Then just get a wire from one of the red and one of the black to go to your amp, and on the amp just put the red on one of the positive connections and put the black on one of the negative.

[SticBandt2004]

is this right?!? the pic is my profile pic

[Ingleside]

yup just like that.
now just run that set of wires to one amp and do the same for the other amp and sub.

[SticBandt2004]

Sweetness!! Thanks