Closed Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 21

Reload Thread: 6000+ rms at .7

  1. #1
    ATLHoe's Avatar
    ATLHoe is offline Junior Member



    Join Date
    Feb 2013
    Location
    atlanta
    Posts
    12
    Post Thanks / Like
    Feedback Score
    0
    Mentioned
    0 Post(s)

    6000+ rms at .7

    looking for 1 amp or 2 that can be strapped that can do at least 6k rms at .7ohm
    ive seen 2 SS 3400.1s on caco and i know i can strap them through a maxxlink.. theyre around 630.
    locally i can get a AA500.1 for $600 which may be the best overall deal seeing that at .5 they do close to 7k(opti 7k, same board)

    lets see what you guys have before i make a local decision or not. dont wanna spend more than 700 used or i'll just but a opti 7k new..
    btw the AA 500.1's are essentially new.. which makes me consider it even more







  2. #2
    jaeguerra909's Avatar
    jaeguerra909 is offline CarAudio.com Elite



    Join Date
    Nov 2011
    Location
    ontario,california
    Posts
    1,453
    Post Thanks / Like
    Feedback Score
    9 (100%)
    Mentioned
    3 Post(s)

    Re: 6000+ rms at .7

    Amps are rated at .7? Lol all .7 coils read high ao .9 to 1 ohm thats what mkst people should wire to any ways for a true 1 ohm still got box rise on top of that just get the best bang for ur buck



    Hu:pioneer deh-prs80
    Eq:audiocontrol three.2
    Substage:4 sundown zv4 18s
    Front stage:6 pwx 6.5's 2 pwx 8's and 4 obaidian st1 tweeters
    Sub amp:sundown saz 5000d
    Front stage amp:sundown sax 125.4

  3. #3
    Linkz's Avatar
    Linkz is offline Low Bass Junkie



    Join Date
    Aug 2008
    Location
    somewhere
    Posts
    822
    Post Thanks / Like
    Feedback Score
    0
    Mentioned
    0 Post(s)

    Re: 6000+ rms at .7

    Quote Originally Posted by jaeguerra909 View Post
    Amps are rated at .7? Lol all .7 coils read high ao .9 to 1 ohm thats what mkst people should wire to any ways for a true 1 ohm still got box rise on top of that just get the best bang for ur buck
    hes saying .7ohm stable



    My feedback thread [scammers in red]
    bought from: fatboyracing, Pottro 563, Max Power, JHughes, TeamSouthrnBass, stupify

    04 Ford Explorer
    System:
    HU: AVH-P4100
    Sub: Omega 18" D1 (9.5cuft@34hz)
    Sub amp - PA BAMF5500/1D (something new soon)
    Highs/Mids - 9.2/9.4 (not installed)

    WTB: Omega 18" D1 (Pst offer)

  4. #4
    Linkz's Avatar
    Linkz is offline Low Bass Junkie



    Join Date
    Aug 2008
    Location
    somewhere
    Posts
    822
    Post Thanks / Like
    Feedback Score
    0
    Mentioned
    0 Post(s)

    Re: 6000+ rms at .7

    You could try a cactus amp if you could find one.



    My feedback thread [scammers in red]
    bought from: fatboyracing, Pottro 563, Max Power, JHughes, TeamSouthrnBass, stupify

    04 Ford Explorer
    System:
    HU: AVH-P4100
    Sub: Omega 18" D1 (9.5cuft@34hz)
    Sub amp - PA BAMF5500/1D (something new soon)
    Highs/Mids - 9.2/9.4 (not installed)

    WTB: Omega 18" D1 (Pst offer)

  5. #5
    97maxima's Avatar
    97maxima is offline Loud Trunk?



    Join Date
    Oct 2009
    Location
    Sc
    Posts
    1,510
    Post Thanks / Like
    Feedback Score
    14 (100%)
    Mentioned
    2 Post(s)

    Re: 6000+ rms at .7

    I would just get that aa 500.1 i run 2 and they are beast. Just dont exceed 2v on the pre amp and have plenty of batt



    American Bass DC Power

    Refs: Too many to list

  6. #6
    jockhater2's Avatar
    jockhater2 is offline CarAudio.com Veteran



    Join Date
    Sep 2011
    Location
    Saukville, WI
    Posts
    2,934
    Post Thanks / Like
    Images
    5
    Feedback Score
    21 (100%)
    Mentioned
    36 Post(s)

    Re: 6000+ rms at .7

    Quote Originally Posted by ATLHoe View Post
    looking for 1 amp or 2 that can be strapped that can do at least 6k rms at .7ohm
    ive seen 2 SS 3400.1s on caco and i know i can strap them through a maxxlink.. theyre around 630.
    locally i can get a AA500.1 for $600 which may be the best overall deal seeing that at .5 they do close to 7k(opti 7k, same board)

    lets see what you guys have before i make a local decision or not. dont wanna spend more than 700 used or i'll just but a opti 7k new..
    btw the AA 500.1's are essentially new.. which makes me consider it even more
    The amp in my signature is for sale. Does 5500 watts @ 1 ohm on 14.4v bench tested. And I have ran it at 1/2 ohm for 6 weeks.



    Head Unit Pioneer P99RS
    3 Runs of 1/0 OFC Power and 3 Runs of 1/0 OFC Ground
    1 XS Power D3400 & 2 XS Power XP3000 with Copper Bus Bars
    380 Amp & 320 Amp Iraggi Alternators(One is a chevy case, the other ford)
    RD 7500.1 running 2 12 inch SPLaudio (AA Mayhem motors/baskets)
    Tuned to 36 hertz. About 4.5 cubic feet, 8" Aeroport (made by dbeez)
    Zed Audio Leviathan III on Morel MDT-29, RS100-4 & RS225-8 Daytons
    Alex Jones www.infowars.com Endgame, Obama Deception, Truth Rising,
    Fluoride in the water, poison in vaccines, chemical trails in the skyglobal
    elite banks run our government towards a one world global government.

  7. #7
    ATLHoe's Avatar
    ATLHoe is offline Junior Member

    Threadstarter


    Join Date
    Feb 2013
    Location
    atlanta
    Posts
    12
    Post Thanks / Like
    Feedback Score
    0
    Mentioned
    0 Post(s)

    Re: 6000+ rms at .7

    Quote Originally Posted by jaeguerra909 View Post
    Amps are rated at .7? Lol all .7 coils read high ao .9 to 1 ohm thats what mkst people should wire to any ways for a true 1 ohm still got box rise on top of that just get the best bang for ur buck
    actually my dmm shows my coils read .7 and 1.4 in series. im not a noob by any means and i fully understand impedance rise from the box. this isnt my first go round...
    Quote Originally Posted by Linkz View Post
    hes saying .7ohm stable
    yea something stable.. i know it'll rise. i was looking at 2 opti 3500s and run them strapped at .7(.35 each amp)... i think that way i'd have less rise
    Quote Originally Posted by Linkz View Post
    You could try a cactus amp if you could find one.
    yea exactly, if i can find one. i had some cactus subs a few years ago...
    Quote Originally Posted by 97maxima View Post
    I would just get that aa 500.1 i run 2 and they are beast. Just dont exceed 2v on the pre amp and have plenty of batt
    2 for $1200 or 1 for 600, but you say dont exceed 2v, thats gonna be a real issue seeing that i have an 80prs and its 5v pres. with my mids currently i often crank it so i know its putting out well past 2v. if thats the case that amp will not work well for me, which ***** b/c for $600 new thats an awesome deal
    Quote Originally Posted by jockhater2 View Post
    The amp in my signature is for sale. Does 5500 watts @ 1 ohm on 14.4v bench tested. And I have ran it at 1/2 ohm for 6 weeks.
    i was looking at it on caco. i like it but 750 + shipping is to steep for me at the moment when i know i can get a Taramp HD8000 for $730 brand new (8k at 12.6)




  8. #8
    jockhater2's Avatar
    jockhater2 is offline CarAudio.com Veteran



    Join Date
    Sep 2011
    Location
    Saukville, WI
    Posts
    2,934
    Post Thanks / Like
    Images
    5
    Feedback Score
    21 (100%)
    Mentioned
    36 Post(s)

    Re: 6000+ rms at .7

    Quote Originally Posted by ATLHoe View Post
    actually my dmm shows my coils read .7 and 1.4 in series. im not a noob by any means and i fully understand impedance rise from the box. this isnt my first go round...

    yea something stable.. i know it'll rise. i was looking at 2 opti 3500s and run them strapped at .7(.35 each amp)... i think that way i'd have less rise

    yea exactly, if i can find one. i had some cactus subs a few years ago...

    2 for $1200 or 1 for 600, but you say dont exceed 2v, thats gonna be a real issue seeing that i have an 80prs and its 5v pres. with my mids currently i often crank it so i know its putting out well past 2v. if thats the case that amp will not work well for me, which ***** b/c for $600 new thats an awesome deal

    i was looking at it on caco. i like it but 750 + shipping is to steep for me at the moment when i know i can get a Taramp HD8000 for $730 brand new (8k at 12.6)
    I wouldn't touch a taramp with a 10ft pole.
    LOL single power and ground inputs on a 8k amp. Scary.



    Head Unit Pioneer P99RS
    3 Runs of 1/0 OFC Power and 3 Runs of 1/0 OFC Ground
    1 XS Power D3400 & 2 XS Power XP3000 with Copper Bus Bars
    380 Amp & 320 Amp Iraggi Alternators(One is a chevy case, the other ford)
    RD 7500.1 running 2 12 inch SPLaudio (AA Mayhem motors/baskets)
    Tuned to 36 hertz. About 4.5 cubic feet, 8" Aeroport (made by dbeez)
    Zed Audio Leviathan III on Morel MDT-29, RS100-4 & RS225-8 Daytons
    Alex Jones www.infowars.com Endgame, Obama Deception, Truth Rising,
    Fluoride in the water, poison in vaccines, chemical trails in the skyglobal
    elite banks run our government towards a one world global government.

  9. #9
    Team Ampere's Avatar
    Team Ampere is offline Team Ampere Audio-Alabama



    Join Date
    Nov 2011
    Location
    birmingham,alabama
    Posts
    278
    Post Thanks / Like
    Feedback Score
    3 (100%)
    Mentioned
    8 Post(s)

    Re: 6000+ rms at .7

    Quote Originally Posted by jockhater2 View Post
    I wouldn't touch a taramp with a 10ft pole.
    LOL single power and ground inputs on a 8k amp. Scary.
    Couldnt u run somedual inluts and it would be almkst exqctly theswme as if the amp jtself had 2setsof power and grounds??? Or no ami wrong???

    I only ask because I am also lokking atthe tarampshd ljne as wellas the tline. I think the 10k and down have sing, e lower and grounds. The12k andup have dual inputs



    1997 Cadillac Seville
    30 cube Clamshell designed and installed by Neill Barber @ Audio Extremes
    6-Sundown ZV3 15"s d2....Sub Amps-AMPERE AUDIO 3800.1s
    Fiberglass Front Doors done by Me...6-Crescendo PWX 10s...6-Selenuim ST200s...Mids/Highs amps-AMPERE AUDIO 125.4s
    Head Unit-Pioneer 80prs
    Sky High 1/0, XS Power XP FLEX 8g
    Tenney 320a alt
    Batteries-Powerware Group 31s-(12 of them bastards)
    3" lift kit by Lift-a-brand.. 24" Verde Helix Rims

  10. #10
    Team Ampere's Avatar
    Team Ampere is offline Team Ampere Audio-Alabama



    Join Date
    Nov 2011
    Location
    birmingham,alabama
    Posts
    278
    Post Thanks / Like
    Feedback Score
    3 (100%)
    Mentioned
    8 Post(s)

    Re: 6000+ rms at .7

    Quote Originally Posted by ATLHoe View Post
    actually my dmm shows my coils read .7 and 1.4 in series. im not a noob by any means and i fully understand impedance rise from the box. this isnt my first go round...

    yea something stable.. i know it'll rise. i was looking at 2 opti 3500s and run them strapped at .7(.35 each amp)... i think that way i'd have less rise

    yea exactly, if i can find one. i had some cactus subs a few years ago...

    2 for $1200 or 1 for 600, but you say dont exceed 2v, thats gonna be a real issue seeing that i have an 80prs and its 5v pres. with my mids currently i often crank it so i know its putting out well past 2v. if thats the case that amp will not work well for me, which ***** b/c for $600 new thats an awesome deal

    i was looking at it on caco. i like it but 750 + shipping is to steep for me at the moment when i know i can get a Taramp HD8000 for $730 brand new (8k at 12.6)
    Where are you seeing aa 500.1s cor 600 bucks brand spankin new??? Hell I will split the bill with u and maybe we can get bith kf them cheaper



    1997 Cadillac Seville
    30 cube Clamshell designed and installed by Neill Barber @ Audio Extremes
    6-Sundown ZV3 15"s d2....Sub Amps-AMPERE AUDIO 3800.1s
    Fiberglass Front Doors done by Me...6-Crescendo PWX 10s...6-Selenuim ST200s...Mids/Highs amps-AMPERE AUDIO 125.4s
    Head Unit-Pioneer 80prs
    Sky High 1/0, XS Power XP FLEX 8g
    Tenney 320a alt
    Batteries-Powerware Group 31s-(12 of them bastards)
    3" lift kit by Lift-a-brand.. 24" Verde Helix Rims

  11. #11
    Team Ampere's Avatar
    Team Ampere is offline Team Ampere Audio-Alabama



    Join Date
    Nov 2011
    Location
    birmingham,alabama
    Posts
    278
    Post Thanks / Like
    Feedback Score
    3 (100%)
    Mentioned
    8 Post(s)

    Re: 6000+ rms at .7

    Quote Originally Posted by ATLHoe View Post
    actually my dmm shows my coils read .7 and 1.4 in series. im not a noob by any means and i fully understand impedance rise from the box. this isnt my first go round...

    yea something stable.. i know it'll rise. i was looking at 2 opti 3500s and run them strapped at .7(.35 each amp)... i think that way i'd have less rise

    yea exactly, if i can find one. i had some cactus subs a few years ago...

    2 for $1200 or 1 for 600, but you say dont exceed 2v, thats gonna be a real issue seeing that i have an 80prs and its 5v pres. with my mids currently i often crank it so i know its putting out well past 2v. if thats the case that amp will not work well for me, which ***** b/c for $600 new thats an awesome deal


    Whers u finding aa 500.1s for 600 bucks brand new... hell if u want man, we csn get them both and maybe we will come ouy cheaper.. I get 1 and u get 1
    i was looking at it on caco. i like it but 750 + shipping is to steep for me at the moment when i know i can get a Taramp HD8000 for $730 brand new (8k at 12.6)
    Where are you seeing aa 500.1s cor 600 bucks brand spankin new??? Hell I will split the bill with u and maybe we can get bith kf them cheaper



    1997 Cadillac Seville
    30 cube Clamshell designed and installed by Neill Barber @ Audio Extremes
    6-Sundown ZV3 15"s d2....Sub Amps-AMPERE AUDIO 3800.1s
    Fiberglass Front Doors done by Me...6-Crescendo PWX 10s...6-Selenuim ST200s...Mids/Highs amps-AMPERE AUDIO 125.4s
    Head Unit-Pioneer 80prs
    Sky High 1/0, XS Power XP FLEX 8g
    Tenney 320a alt
    Batteries-Powerware Group 31s-(12 of them bastards)
    3" lift kit by Lift-a-brand.. 24" Verde Helix Rims

  12. #12
    ATLHoe's Avatar
    ATLHoe is offline Junior Member

    Threadstarter


    Join Date
    Feb 2013
    Location
    atlanta
    Posts
    12
    Post Thanks / Like
    Feedback Score
    0
    Mentioned
    0 Post(s)

    Re: 6000+ rms at .7

    Locally, a guy in our group is going through a hard time and has 2 of them brand new for sale for $600 each




  13. #13
    ATLHoe's Avatar
    ATLHoe is offline Junior Member

    Threadstarter


    Join Date
    Feb 2013
    Location
    atlanta
    Posts
    12
    Post Thanks / Like
    Feedback Score
    0
    Mentioned
    0 Post(s)

    Re: 6000+ rms at .7

    by the way, subs are tantric hdd15s in 8.2 cubes tuned to 33.8(34hz)




  14. #14
    ATLHoe's Avatar
    ATLHoe is offline Junior Member

    Threadstarter


    Join Date
    Feb 2013
    Location
    atlanta
    Posts
    12
    Post Thanks / Like
    Feedback Score
    0
    Mentioned
    0 Post(s)

    Re: 6000+ rms at .7

    as for the taramp. i actually bought one 2 months ago and sold it to a friend b/c i didnt have my subs yet and money was tight. does only have single in and ground but its efficient. i had toolmaker dual in/gnd on it
    benched over 8300 at 12.6 and over 10k at 14.4
    i have the power since i have 4 300 amp alts and6 pc1700's.. and i run at 15.1




  15. #15
    jockhater2's Avatar
    jockhater2 is offline CarAudio.com Veteran



    Join Date
    Sep 2011
    Location
    Saukville, WI
    Posts
    2,934
    Post Thanks / Like
    Images
    5
    Feedback Score
    21 (100%)
    Mentioned
    36 Post(s)

    Re: 6000+ rms at .7

    Quote Originally Posted by nicholasmccabe View Post
    Couldnt u run somedual inluts and it would be almkst exqctly theswme as if the amp jtself had 2setsof power and grounds??? Or no ami wrong???

    I only ask because I am also lokking atthe tarampshd ljne as wellas the tline. I think the 10k and down have sing, e lower and grounds. The12k andup have dual inputs
    Yes. Still a cheap amp made with cheap parts. You get what you pay for.



    Head Unit Pioneer P99RS
    3 Runs of 1/0 OFC Power and 3 Runs of 1/0 OFC Ground
    1 XS Power D3400 & 2 XS Power XP3000 with Copper Bus Bars
    380 Amp & 320 Amp Iraggi Alternators(One is a chevy case, the other ford)
    RD 7500.1 running 2 12 inch SPLaudio (AA Mayhem motors/baskets)
    Tuned to 36 hertz. About 4.5 cubic feet, 8" Aeroport (made by dbeez)
    Zed Audio Leviathan III on Morel MDT-29, RS100-4 & RS225-8 Daytons
    Alex Jones www.infowars.com Endgame, Obama Deception, Truth Rising,
    Fluoride in the water, poison in vaccines, chemical trails in the skyglobal
    elite banks run our government towards a one world global government.

Closed Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Replies: 3
    Last Post: 12-06-2005, 05:55 AM
  2. About 800w RMS at almost any ohm
    By dan7532 in forum Amplifiers
    Replies: 15
    Last Post: 11-19-2004, 06:36 PM
  3. i need 2000w rms at 2ohms
    By 300zxmobster in forum Amplifiers
    Replies: 2
    Last Post: 03-23-2004, 09:53 PM

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may edit your posts

1e2 Forum