Wtb 12" beastly subwoofer

[Louisiana_CRX]

DD 9500 motor $170 shipped

[davidtemple]

I have a BNIB pair of SOundstream Reference R1-12's they still go for $389 each shipped on the net.

Dual 3" Flat Wire Wound Voice Coil
Copper Clad Aluminum Voice Coil Wire
Dual Layer Aluminum Voice Coil Former
All-In-One Discrete Mount Terminal
Tall Motor Gap for extended X-Max
Dual Large High Temp Ferrite Magnets
Integrated Aluminum Motor Heat Sink
Stamped Aluminum Cone and Dust Cap for Added Heat Dissipation.
Large Diameter Surround for Added Cone Surface Area
Dual Mirror Stacked Spiders with Integrated Tinsel Leads
Secondary Stamped Steel Basket for Easy Re-Coning
Basket: 2mm Stamp Steel Re-cone Frame.
Motor: Patent Pending D.U.F. (Dual Under hung Flux Plates).
Magnet: Dual 100oz ferrite magnet rings.
Heat Sink: Patent Pending Washer Aluminum Heat Sink.
Ventilation: Pole Piece Sliced to Release Heat and Pressure from under the voice oil.
Voice Coil: 3" Parallel Windings of Copper Clad Aluminum wire wrapped dual ayers of aluminum former
Spider: Dual Mirror Stacked NOMEX Spiders with integrated flat tinsel leads.
Diaphragm: Reinforced Stamped Aluminum Cone and Dust Cap.
Surround: Santoprene Rubber Surround.
Mounting Depth: 7.5"
Outer Diameter: 10.375"
Cutout Diameter: 11.125"
Driver Displacement: .15 cu.ft.
Voice Coil: 3"
Magnet Weight: 250 oz
Resonant Frequency: 26.795Hz

[Corybrdmn]

Looking for dd 9500 or 3500 motor

[CerwinVega_Fan]

Looking for dd 9500 or 3500 motor

[DbDesigns]

I have a treo ssx. but it is a d1.

[Corybrdmn]

What one is that vega?

[CerwinVega_Fan]

What one is that vega?

9515f

[Corybrdmn]

I need it to be a 12 at the biggest

[CerwinVega_Fan]

I need it to be a 12 at the biggest

Rebuild it...
I also have this re audio 12 sitting here looking at me. Its brand new

[Corybrdmn]

What series of re?

---------- Post added at 08:17 PM ---------- Previous post was at 08:16 PM ----------

I have a treo ssx. but it is a d1.

I just need the final ohm load to be 1 ohm

[cyn]

What series of re?

---------- Post added at 08:17 PM ---------- Previous post was at 08:16 PM ----------



I just need the final ohm load to be 1 ohm

That Re is the 2003 HC , I have its brother sitting on my floor right now... very **** good sub

[Corybrdmn]

Power rating on them?

[Cadillaccam]

I have a atomic apx built by psi. Pm me if interested

[CerwinVega_Fan]

Power rating on them?

Its a dual 2 rated 1200wrms. Can take more...

[Timmy13091]

Its a dual 2 rated 1200wrms. Can take more...

Any trades on re's