Closed Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 19

Reload Thread: SAZ-2500D v.2 Prototype Completed

  1. #1
    sundownz's Avatar
    sundownz is offline Supporting Vendor sundownz is a Supporting Member of the forum!

    sundownz is a Supporting Vendor of the forum!

    Join Date
    Aug 2003
    Location
    North Carolina
    Posts
    10,996
    Post Thanks / Like
    Mentioned
    91 Post(s)

    SAZ-2500D v.2 Prototype Completed

    We should have it in a week or so to test ourselves; factory testing has went very well and it is meeting all of our design goals.

    Length without feet = 18.89"

    With the feet total length is roughly on par with the original version (20.15") -- then the case is of course narrower. So overall foot-print is down.

    Will get some side to side pics when the prototype gets here.








    - Jacob Fuller
    - Owner, Sundown Audio
    - Associate, Stereo Integrity

    - I DO NOT USE PMs ON HERE -- Please e-mail me!
    - E-MAIL is sundownz@sundownaudio.com
    Simon Eichenberger is THE MAN.




  2. #2
    SourDeez's Avatar
    SourDeez is offline CarAudio.com Veteran



    Join Date
    Apr 2007
    Location
    Fuqy u
    Posts
    4,128
    Post Thanks / Like
    Mentioned
    64 Post(s)

    Re: SAZ-2500D v.2 Prototype Completed

    ...I'd smoke the sh1t outta that!



    Headunit - Stock cassette player - Pioneer P9400
    Front Stage - Pyle 8 inch subs (1000 watt peak!!) - Polk DB6.5 (about to be CDT 6.5s)
    Rear stage - Deleted (stolen) - Deleted
    Sub stage - custom built 15 inch sony xplod (5k watt peak!!!) (huge box) - Two SA12's built by Corey
    Sub amp - Pyle 8000w peak!! (spl edition) - AQ2200
    Electircal - 35 amp alt from ford festiva upgrade, stolen battery, 28 gauge solder coil for my cable - Dual D34 Yellows, 1/0 trystar OFC, 135amp alt

  3. #3
    groundpound4200's Avatar
    groundpound4200 is offline Da fuq did I just read?



    Join Date
    Nov 2007
    Location
    Mankato, MN
    Age
    29
    Posts
    5,250
    Post Thanks / Like
    Mentioned
    4 Post(s)

    Re: SAZ-2500D v.2 Prototype Completed

    like a crack rock son!



    2007 Honda Pilot 2008 Nissan Maxima
    2 RD D9s strapped @ 1 ohm Sundown SAZ-1500D V.3
    2 Sundown Nightshade V.2s 2 10" Atomic APX
    Sundown SAX-125.2 x 2 Sundown SAX-100.4
    Sundown NeoPro 6.5"s, JL ZR Tweets Sundown NeoPros

    RIP Taylor aka NewAgeKing, you are missed!

  4. #4
    sundownz's Avatar
    sundownz is offline Supporting Vendor sundownz is a Supporting Member of the forum!

    Threadstarter
    sundownz is a Supporting Vendor of the forum!

    Join Date
    Aug 2003
    Location
    North Carolina
    Posts
    10,996
    Post Thanks / Like
    Mentioned
    91 Post(s)

    Re: SAZ-2500D v.2 Prototype Completed

    The amp is here at the shop :


    * The main capacitor bank now contains 160v units for maximum reliability at 19v operation.


    * As with the other new 2012 amps we have a fan


    * 16x IRF064N power supply MOSFETs (BEEF)



    - Jacob Fuller
    - Owner, Sundown Audio
    - Associate, Stereo Integrity

    - I DO NOT USE PMs ON HERE -- Please e-mail me!
    - E-MAIL is sundownz@sundownaudio.com
    Simon Eichenberger is THE MAN.

  5. #5
    Spooney's Avatar
    Spooney is online now Premium Member Spooney is a Supporting Member of the forum!



    Join Date
    Dec 2007
    Location
    Charlotte,MI,USA
    Age
    33
    Posts
    3,969
    Post Thanks / Like
    Mentioned
    75 Post(s)

    Re: SAZ-2500D v.2 Prototype Completed

    Hmmm I've seen good 1500 watt amps with half that many IRF064N's in the power supply. Should be a beast of an amp.




  6. #6
    03F150MrSBF's Avatar
    03F150MrSBF is offline Senior VIP Member



    Join Date
    Oct 2008
    Location
    Texas
    Posts
    240
    Post Thanks / Like
    Mentioned
    15 Post(s)

    Re: SAZ-2500D v.2 Prototype Completed

    Looks good. Is there a price point your expecting this at?




  7. #7
    tat2bass's Avatar
    tat2bass is online now CarAudio.com Elite



    Join Date
    Aug 2011
    Location
    Cali
    Posts
    1,576
    Post Thanks / Like
    Mentioned
    16 Post(s)

    Re: SAZ-2500D v.2 Prototype Completed

    Meh




  8. #8
    sundownz's Avatar
    sundownz is offline Supporting Vendor sundownz is a Supporting Member of the forum!

    Threadstarter
    sundownz is a Supporting Vendor of the forum!

    Join Date
    Aug 2003
    Location
    North Carolina
    Posts
    10,996
    Post Thanks / Like
    Mentioned
    91 Post(s)

    Re: SAZ-2500D v.2 Prototype Completed

    12v clamp testing :

    2420 @ 1.86 ohms
    67.1v
    36.06a

    2490 @ 1.57 ohms
    66.2v
    42.1a

    2750 @ 1.40 ohms
    62.1v
    44.3a

    2950 @ 0.94 ohms
    52.4v
    56.3a

    Very pleased with that. It is right on par with the v.1 model -- we will do typical minor tweaks on production and maybe squeeze a few % more out of it.

    As usual this was done on my Extech power clamp; it reads power out directly very accurately. I use measured voltage to calculate amperage and then actual impedance.

    Once I get a handful of free time I will do a 16v round-up with all of the new prototypes.

    ---------- Post added at 01:30 PM ---------- Previous post was at 01:30 PM ----------

    Quote Originally Posted by 03F150MrSBF View Post
    Looks good. Is there a price point your expecting this at?
    We expect them to retail from authorized dealers for $775



    - Jacob Fuller
    - Owner, Sundown Audio
    - Associate, Stereo Integrity

    - I DO NOT USE PMs ON HERE -- Please e-mail me!
    - E-MAIL is sundownz@sundownaudio.com
    Simon Eichenberger is THE MAN.

  9. #9
    sundownz's Avatar
    sundownz is offline Supporting Vendor sundownz is a Supporting Member of the forum!

    Threadstarter
    sundownz is a Supporting Vendor of the forum!

    Join Date
    Aug 2003
    Location
    North Carolina
    Posts
    10,996
    Post Thanks / Like
    Mentioned
    91 Post(s)

    Re: SAZ-2500D v.2 Prototype Completed

    Oh I forgot to put supply voltage in... woops.

    On the lower power figures we had around 13-13.3v and at higher power 12.5v at the time of measurement (my meter reads about 3-5 seconds in to the tone)



    - Jacob Fuller
    - Owner, Sundown Audio
    - Associate, Stereo Integrity

    - I DO NOT USE PMs ON HERE -- Please e-mail me!
    - E-MAIL is sundownz@sundownaudio.com
    Simon Eichenberger is THE MAN.

  10. #10
    jaeguerra909's Avatar
    jaeguerra909 is offline CarAudio.com Elite



    Join Date
    Nov 2011
    Location
    ontario,california
    Posts
    1,447
    Post Thanks / Like
    Mentioned
    3 Post(s)

    Re: SAZ-2500D v.2 Prototype Completed

    how much we talkin jacob?? this is what i want for my daily car



    Hu:pioneer deh-prs80
    Eq:audiocontrol three.2
    Substage:4 sundown zv4 18s
    Front stage:6 pwx 6.5's 2 pwx 8's and 4 obaidian st1 tweeters
    Sub amp:sundown saz 5000d
    Front stage amp:sundown sax 125.4

  11. #11
    pinoy2o9's Avatar
    pinoy2o9 is online now CarAudio.com Elite



    Join Date
    Jun 2011
    Location
    Modesto, Ca
    Posts
    953
    Post Thanks / Like
    Mentioned
    21 Post(s)

    Re: SAZ-2500D v.2 Prototype Completed

    Sell me that prototype pls.



    2000 Honda Accord coupe *slow build........* KEEP CALM & VAPE ON
    HU: Pioneer SPA-DA210
    F Stage: Soundqubed QP-MR6.5
    R Stage: RE Audio XXX12 V2D4
    Box: 2.5cubic ft @32
    Amps: Arc Audio KS300.2 & Crossfire XP2400D
    Wiring: Execution Audio 1/0 wire
    Electrical: Big 3 upgrade, 2x F&R Optima d34 yellow top, Powermax 200Amp alt

  12. #12
    RangerDangerV2's Avatar
    RangerDangerV2 is offline CarAudio.com Veteran



    Join Date
    Nov 2011
    Location
    st cloud MN
    Posts
    4,868
    Post Thanks / Like
    Mentioned
    72 Post(s)

    Re: SAZ-2500D v.2 Prototype Completed

    love those angled mosfets and the fan is a very nice addition! grade A work as always.



    1999 Tahoe
    2 sa12s
    4th order
    145.18 @33z... with less than 500 watts!

  13. #13
    CAT MAN's Avatar
    CAT MAN is offline Banned



    Join Date
    Dec 2010
    Location
    Roanoke,VA
    Posts
    8,131
    Post Thanks / Like
    Mentioned
    113 Post(s)

    Re: SAZ-2500D v.2 Prototype Completed

    wow. my amp uses them same caps. never bought a cap but when i did i fell out. beast amp jacob. maybe we could work out a backdoor special?




  14. #14
    murph's Avatar
    murph is offline Low for Life



    Join Date
    Sep 2011
    Location
    Richmond,VA
    Posts
    3,950
    Post Thanks / Like
    Mentioned
    90 Post(s)

    Re: SAZ-2500D v.2 Prototype Completed

    Keyboard is a little sticky...



    Hu: kenwood kdc-x995
    Sub: Boston acoustics G5 12 in a quasi 6th order
    Amp: Phoenix gold zx600.2 ti
    Front Speakers: Eclipse sc6500
    HIT UP FOR BASS ---> http://www.youtube.com/user/BassWithMurph?feature=mhee

  15. #15
    sundownz's Avatar
    sundownz is offline Supporting Vendor sundownz is a Supporting Member of the forum!

    Threadstarter
    sundownz is a Supporting Vendor of the forum!

    Join Date
    Aug 2003
    Location
    North Carolina
    Posts
    10,996
    Post Thanks / Like
    Mentioned
    91 Post(s)

    Re: SAZ-2500D v.2 Prototype Completed

    Regular MAP from a dealer will be $775

    Pre-order specials will apply just as with the 1500D v.3 and 125.4



    - Jacob Fuller
    - Owner, Sundown Audio
    - Associate, Stereo Integrity

    - I DO NOT USE PMs ON HERE -- Please e-mail me!
    - E-MAIL is sundownz@sundownaudio.com
    Simon Eichenberger is THE MAN.

Closed Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Fs saz-2500d
    By loudwhat? in forum Amplifier Classifieds
    Replies: 8
    Last Post: 04-19-2011, 02:48 PM

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may edit your posts

1e2 Forum