Need one 10" sub for SQ

[DetoxLS]

I have a 4 channel us acoustics amp and am looking to amp the front components and power one 10" sub. I am looking for SQ for all types of music. Which sub would work with this amp and would sound good. I have heard the RE RE sub is pretty good. Although i dont have a clue if it would work with the amp. I need a sub that will allow my amp to put out as much power as possible for the open 2 channels(if possible?) What would be a good sub to get? Want to spend no more than $100 on one 10".

OUTPUT POWER
Per channel @ 4 Ohms
@ 12.9v input *************65Wx4CH

Per channel @ 2 Ohms
@ 12.9v input *************80Wx4CH

Bridged Mono @ 4 Ohms
@ 12.9v input *************160Wx2CH

FREQUENCY RESPONSE
10Hz-30Khz, -0.5dB
TOTAL HARMONIC DISTORTION
Less Then 0.01%
INPUT SENSITIVITY, HIGH LEVEL •
INPUT SENSITIVITY, LOW LEVEL
110mV-8.8V

[azbass]

jbl GT100, i got 2 for under $100 on ebay.

[req]

you got 65x2(speakers) and 160x1(sub)?

he has 160 watts for a sub and wants SQ people.

[DetoxLS]

Would the alpine sub work? type-s or type-r?


Chris

[80INCHES]

sq with 160watts......this will be interesting

80
thats like saying i want spl but i have 200watts of power

[DetoxLS]

if i cant do it ill take NO as an answer..i figured it wouldnt be too hard to power one 10" when heavy bass isnt that big of a deal for me


SO what would be the best sound quality i can get from the amp? 2 sets of amped components?


Chris

[azbass]

^ Jbl Gt100

[Ray21]

Well with that amount of power you'll have to use a large sealed or ported box to make the most of it. How about a ID10v.3, you can get factory refurbs for $65 from Cardomain.com.
1.5 sealed or 2 cubes at 28hz.

[DetoxLS]

Do i look for dual 2 ohm or dual 4 ohm

[JimJ]

sq with 160watts......this will be interesting

in a mobile enviroment, yes. An excellent deadening job will be required to overcome road noise. In the home, a watt and a half will give some of the best SQ you've ever heard

Back on topic - I'd go with an Alpine Type-R 10" and go with a very large ported enclosure - if you're up to the design, or have someone else do it, I'd go with a folded horn for something like this. Efficiencies of 100dB/W aren't uncommon with a setup like that.

[audioholic]

Adire Shiva. Its close to your budget at $125.

[JimJ]

You know that's not a 10"

He might not have the room that the Shiva requires (at least a cubic foot, closer to 2 cubes for the low-Q setup he'd need with that power).

[audioholic]

Doh yeah I remembered he wanted a 10 after I posted. Came back to post an oops and you'd already beat me to it. lol

[Ray21]

Do i look for dual 2 ohm or dual 4 ohm

Dual 2 ohm wired in parallel = 4ohms

[azbass]

You know that's not a 10"

He might not have the room that the Shiva requires (at least a cubic foot, closer to 2 cubes for the low-Q setup he'd need with that power).

but hell have the room for a very large ported enclosure for the Type-R 10" right?